wayne: Initial bringup

Change-Id: I211da5781d8c7a16199fd8a18e1b00cfc9e01944
Signed-off-by: Isaac Chen <isaacchen@isaacchen.cn>

5 files changed, 599 insertions, 152 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index 2b7d148..a5131cd 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -1,43 +1,467 @@
 <?xml version="1.0" encoding="utf-8"?>
-<!--
-    Copyright (c) 2016, The Linux Foundation. All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions are
-    met:
-        * Redistributions of source code must retain the above copyright
-          notice, this list of conditions and the following disclaimer.
-        * Redistributions in binary form must reproduce the above
-          copyright notice, this list of conditions and the following
-          disclaimer in the documentation and/or other materials provided
-          with the distribution.
-        * Neither the name of The Linux Foundation nor the names of its
-          contributors may be used to endorse or promote products derived
-          from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-    WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-    ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-    BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-    OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-    IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
 -->
-<resources>
-   <!-- The duration (in milliseconds) for the outgoing sms authorization request to timeout.-->
-   <integer name="config_sms_authorization_timeout_ms">15000</integer>
-   <!-- Enable SMS authorization support -->
-   <bool name="config_sms_authorization_enabled">true</bool>
-
-   <!-- List of regexpressions describing the interface (if any) that represent tetherable
-          Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
-          should be empty.  An example would be "softap.*" -->
-   <string-array translatable="false" name="config_tether_wifi_regexs">
-       <item>"wigig0"</item>
-       <item>"softap0"</item>
-   </string-array>
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds.  Do not translate. -->
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Flag indicating whether the we should enable the automatic brightness in Settings.
+         Software implementation will be used if config_hardware_auto_brightness_available is not set -->
+    <bool name="config_automatic_brightness_available">true</bool>
+
+    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
+         The N entries of this array define N + 1 control points as follows:
+         (1-based arrays)
+         Point 1: (0, value[1]): lux <= 0
+         Point 2: (level[1], value[2]): 0 < lux <= level[1]
+         Point 3: (level[2], value[3]): level[2] < lux <= level[3]
+         ...
+         Point N+1: (level[N], value[N+1]): level[N] < lux
+         The control points must be strictly increasing.  Each control point
+         corresponds to an entry in the brightness backlight values arrays.
+         For example, if LUX == level[1] (first element of the levels array)
+         then the brightness will be determined by value[2] (second element
+         of the brightness values array).
+         Spline interpolation is used to determine the auto-brightness
+         backlight values for LUX levels between these control points.
+         Must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLevels">
+        <item>1</item> <!-- pitch black -->
+        <item>5</item> <!-- dark indoor -->
+        <item>10</item> <!-- twilight -->
+        <item>50</item> <!-- dim indoor -->
+        <item>100</item> <!-- home -->
+        <item>300</item> <!-- office -->
+        <item>500</item> <!-- sunrise -->
+        <item>1000</item> <!-- overcast -->
+        <item>3000</item> <!-- indirect sun -->
+        <item>10000</item> <!-- daylight -->
+    </integer-array>
+
+    <!-- Array of output values for LCD backlight corresponding to the LUX values
+         in the config_autoBrightnessLevels array.  This array should have size one greater
+         than the size of the config_autoBrightnessLevels array.
+         The brightness values must be between 0 and 255 and be non-decreasing.
+         This must be overridden in platform specific overlays -->
+    <integer-array name="config_autoBrightnessLcdBacklightValues">
+        <item>16</item>
+        <item>20</item>
+        <item>24</item>
+        <item>31</item>
+        <item>48</item>
+        <item>74</item>
+        <item>107</item>
+        <item>152</item>
+        <item>194</item>
+        <item>254</item>
+        <item>255</item>
+    </integer-array>
+
+    <!-- Screen brightness used to dim the screen when the user activity
+         timeout expires.  May be less than the minimum allowed brightness setting
+         that can be set by the user. -->
+    <integer name="config_screenBrightnessDim">10</integer>
+
+    <!-- Default screen brightness setting.
+         Must be in the range specified by minimum and maximum. -->
+    <integer name="config_screenBrightnessSettingDefault">128</integer>
+
+    <!-- Minimum screen brightness setting allowed by the power manager.
+         The user is forbidden from setting the brightness below this level. -->
+    <integer name="config_screenBrightnessSettingMinimum">1</integer>
+
+    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
+         for debouncing the light sensor.  Different constants are used to debounce the light sensor
+         when adapting to brighter or darker environments.  This parameter controls how quickly
+         brightness changes occur in response to an observed change in light level that exceeds the
+         hysteresis threshold. -->
+    <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
+    <integer name="config_autoBrightnessDarkeningLightDebounce">6000</integer>
+
+    <!-- The maximum range of gamma adjustment possible using the screen
+         auto-brightness adjustment setting. -->
+    <fraction name="config_autoBrightnessAdjustmentMaxGamma">200%</fraction>
+
+    <!-- Period of time in which to consider light samples in milliseconds. -->
+    <integer name="config_autoBrightnessAmbientLightHorizon">16000</integer>
+
+    <!-- If this is true, the screen will come on when you unplug usb/power/whatever. -->
+    <bool name="config_unplugTurnsOnScreen">true</bool>
+
+    <!-- Boolean indicating if restoring network selection should be skipped -->
+    <!-- The restoring is handled by modem if it is true-->
+    <bool translatable="false" name="skip_restoring_network_selection">true</bool>
+
+    <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. -->
+    <bool name="config_cellBroadcastAppLinks">true</bool>
+
+    <!-- MMS user agent string -->
+    <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string>
+
+    <!-- MMS user agent prolfile url -->
+    <string name="config_mms_user_agent_profile_url" translatable="false">http://www.google.com/oha/rdf/ua-profile-kila.xml</string>
+
+    <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
+    <bool name="config_intrusiveNotificationLed">true</bool>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         USB interfaces.  If the device doesn't want to support tething over USB this should
+         be empty.  An example would be "usb.*" -->
+    <string-array translatable="false" name="config_tether_usb_regexs">
+        <item>"usb\\d"</item>
+        <item>"rndis\\d"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         Wifi interfaces.  If the device doesn't want to support tethering over Wifi this
+         should be empty.  An example would be "softap.*" -->
+    <string-array translatable="false" name="config_tether_wifi_regexs">
+        <item>"wlan0"</item>
+        <item>"wigig0"</item>
+    </string-array>
+
+    <!-- List of regexpressions describing the interface (if any) that represent tetherable
+         bluetooth interfaces.  If the device doesn't want to support tethering over bluetooth this
+         should be empty. -->
+    <string-array translatable="false" name="config_tether_bluetooth_regexs">
+        <item>"bnep\\d"</item>
+        <item>"bt-pan"</item>
+    </string-array>
+
+    <!-- Array of allowable ConnectivityManager network types for tethering -->
+    <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or
+         [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH -->
+    <integer-array translatable="false" name="config_tether_upstream_types">
+        <item>0</item>
+        <item>1</item>
+        <item>5</item>
+        <item>7</item>
+    </integer-array>
+
+    <!-- Dhcp range (min, max) to use for tethering purposes -->
+    <!-- USB is  192.168.42.1 and 255.255.255.0
+         Wifi is 192.168.43.1 and 255.255.255.0
+         BT is limited to max default of 5 connections. 192.168.44.1 to 192.168.48.1
+         with 255.255.255.0
+         P2P is 192.168.49.1 and 255.255.255.0
+         Wigig is 192.168.50.1 and 255.255.255.0
+         Wigig P2P is 192.168.51.1 and 255.255.255.0
+    -->
+    <string-array name="config_tether_dhcp_range">
+        <item>192.168.42.2</item>
+        <item>192.168.42.254</item>
+        <item>192.168.43.2</item>
+        <item>192.168.43.254</item>
+        <item>192.168.44.2</item>
+        <item>192.168.44.254</item>
+        <item>192.168.45.2</item>
+        <item>192.168.45.254</item>
+        <item>192.168.46.2</item>
+        <item>192.168.46.254</item>
+        <item>192.168.47.2</item>
+        <item>192.168.47.254</item>
+        <item>192.168.48.2</item>
+        <item>192.168.48.254</item>
+        <item>192.168.49.2</item>
+        <item>192.168.49.254</item>
+        <item>192.168.50.2</item>
+        <item>192.168.50.254</item>
+        <item>192.168.51.2</item>
+        <item>192.168.51.254</item>
+    </string-array>
+
+    <!-- This string array should be overridden by the device to present a list of network
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
+         [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
+    <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
+         before automatically restore the default connection.  Set -1 if the connection
+         does not require auto-restore. -->
+    <!-- the 6th element indicates boot-time dependency-met value. -->
+    <string-array translatable="false" name="networkAttributes">
+        <item>wifi,1,1,1,-1,true</item>
+        <item>mobile,0,0,0,-1,true</item>
+        <item>mobile_mms,2,0,4,300000,true</item>
+        <item>mobile_supl,3,0,2,300000,true</item>
+        <item>mobile_dun,4,0,2,300000,true</item>
+        <item>mobile_hipri,5,0,3,300000,true</item>
+        <item>mobile_fota,10,0,2,300000,true</item>
+        <item>mobile_ims,11,0,2,300000,true</item>
+        <item>mobile_cbs,12,0,2,300000,true</item>
+        <item>bluetooth,7,7,2,-1,true</item>
+        <item>ethernet,9,9,4,-1,true</item>
+    </string-array>
+
+    <!-- This string array should be overridden by the device to present a list of radio
+         attributes.  This is used by the connectivity manager to decide which networks can coexist
+         based on the hardware -->
+    <!-- An Array of "[ConnectivityManager connectionType],
+                      [# simultaneous connection types]"  -->
+    <string-array translatable="false" name="radioAttributes">
+        <item>"1,1"</item>
+        <item>"0,1"</item>
+        <item>"7,1"</item>
+        <item>"9,1"</item>
+    </string-array>
+
+    <!-- Whether WiFi display is supported by this device.
+         There are many prerequisites for this feature to work correctly.
+         Here are a few of them:
+         * The WiFi radio must support WiFi P2P.
+         * The WiFi radio must support concurrent connections to the WiFi display and
+           to an access point.
+         * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix"
+           remote submix module.  This module is used to record and stream system
+           audio output to the WiFi display encoder in the media server.
+         * The remote submix module "audio.r_submix.default" must be installed on the device.
+         * The device must be provisioned with HDCP keys (for protected content).
+    -->
+    <bool name="config_enableWifiDisplay">true</bool>
+
+    <!-- Set to true if the wifi display supports compositing content stored
+         in gralloc protected buffers.  For this to be true, there must exist
+         a protected hardware path for surface flinger to composite and send
+         protected buffers to the wifi display video encoder.
+         If this flag is false, we advise applications not to use protected
+         buffers (if possible) when presenting content to a wifi display because
+         the content may be blanked.
+         This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS}
+         flag is set for wifi displays.
+    -->
+    <bool name="config_wifiDisplaySupportsProtectedBuffers">true</bool>
+
+    <!-- Boolean indicating whether the wifi chipset has dual frequency band support -->
+    <bool translatable="false" name="config_wifi_dual_band_support">true</bool>
+
+    <!-- Boolean indicating whether the wifi chipset has background scan support -->
+    <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
+
+    <!-- Wifi driver supports batched scan -->
+    <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool>
+
+    <!-- When true use the linux /dev/input/event subsystem to detect the switch changes
+         on the headphone/microphone jack. When false use the older uevent framework. -->
+    <bool name="config_useDevInputEventForAudioJack">true</bool>
+
+    <!-- Indicate whether closing the lid causes the device to go to sleep and opening
+         it causes the device to wake up.
+         The default is false. -->
+    <bool name="config_lidControlsSleep">true</bool>
+
+    <!-- Enables or disables fading edges when marquee is enabled in TextView.
+         Off by default, since the framebuffer readback used to implement the
+         fading edges is prohibitively expensive on most GPUs. -->
+    <bool name="config_ui_enableFadingMarquee">false</bool>
+
+    <!-- ComponentName of a dream to show whenever the system would otherwise have
+         gone to sleep.  When the PowerManager is asked to go to sleep, it will instead
+         try to start this dream if possible.  The dream should typically call startDozing()
+         to put the display into a low power state and allow the application processor
+         to be suspended.  When the dream ends, the system will go to sleep as usual.
+         Specify the component name or an empty string if none.
+
+         Note that doze dreams are not subject to the same start conditions as ordinary dreams.
+         Doze dreams will run whenever the power manager is in a dozing state. -->
+    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
+    <!-- If true, the doze component is not started until after the screen has been
+         turned off and the screen off animation has been performed. -->
+    <bool name="config_dozeAfterScreenOff">true</bool>
+
+    <!-- Power Management: Specifies whether to decouple the auto-suspend state of the
+         device from the display on/off state.
+
+         When false, autosuspend_disable() will be called before the display is turned on
+         and autosuspend_enable() will be called after the display is turned off.
+         This mode provides best compatibility for devices using legacy power management
+         features such as early suspend / late resume.
+
+         When true, autosuspend_display() and autosuspend_enable() will be called
+         independently of whether the display is being turned on or off.  This mode
+         enables the power manager to suspend the application processor while the
+         display is on.
+
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+
+         Refer to autosuspend.h for details.
+    -->
+    <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">false</bool>
+
+    <!-- Power Management: Specifies whether to decouple the interactive state of the
+         device from the display on/off state.
+
+         When false, setInteractive(..., true) will be called before the display is turned on
+         and setInteractive(..., false) will be called after the display is turned off.
+         This mode provides best compatibility for devices that expect the interactive
+         state to be tied to the display state.
+
+         When true, setInteractive(...) will be called independently of whether the display
+         is being turned on or off.  This mode enables the power manager to reduce
+         clocks and disable the touch controller while the display is on.
+
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+
+         Refer to power.h for details.
+    -->
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Screen brightness used to dim the screen while dozing in a very low power state.
+         May be less than the minimum allowed brightness setting
+         that can be set by the user. -->
+    <integer name="config_screenBrightnessDoze">17</integer>
+
+    <!-- Whether device supports double tap to wake -->
+    <bool name="config_supportDoubleTapWake">true</bool>
+
+    <!-- Configure mobile tcp buffer sizes in the form:
+         rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
+         If no value is found for the rat-name in use, the system default will be applied.
+    -->
+    <string-array name="config_mobile_tcp_buffers">
+        <item>umts:131072,262144,1452032,4096,16384,399360</item>
+        <item>hspa:131072,262144,2441216,4096,16384,399360</item>
+        <item>hsupa:131072,262144,2441216,4096,16384,399360</item>
+        <item>hsdpa:131072,262144,2441216,4096,16384,399360</item>
+        <item>hspap:131072,262144,2441216,4096,16384,399360</item>
+        <item>edge:16384,32768,131072,4096,16384,65536</item>
+        <item>gprs:4096,8192,24576,4096,8192,24576</item>
+        <item>1xrtt:16384,32768,131070,4096,16384,102400</item>
+        <item>evdo:131072,262144,1048576,4096,16384,524288</item>
+        <item>lte:524288,1048576,8388608,262144,524288,4194304</item>
+    </string-array>
+
+    <!-- Configure wifi tcp buffersizes in the form:
+         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
+    <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,8388608,262144,524288,4194304</string>
+
+    <!-- Flag specifying whether VoLTE is available on device -->
+    <bool name="config_device_volte_available">true</bool>
+
+    <!-- Flag specifying whether VoLTE should be available for carrier: independent of
+         carrier provisioning. If false: hard disabled. If true: then depends on carrier
+         provisioning, availability etc -->
+    <bool name="config_carrier_volte_available">true</bool>
+
+    <!-- Flag specifying whether WFC over IMS is available on device -->
+    <bool name="config_device_wfc_ims_available">true</bool>
+
+    <!-- Flag specifying whether WFC over IMS should be available for carrier: independent of
+         carrier provisioning. If false: hard disabled. If true: then depends on carrier
+         provisioning, availability etc -->
+    <bool name="config_carrier_wfc_ims_available">true</bool>
+
+    <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true -->
+    <string name="config_ims_package">org.codeaurora.ims</string>
+
+    <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically -->
+    <bool name="config_dynamic_bind_ims">true</bool>
+
+    <!-- Config determines whether to update phone object when voice registration
+         state changes. Voice radio tech change will always trigger an update of
+         phone object irrespective of this config -->
+    <bool name="config_switch_phone_on_voice_reg_state_change">false</bool>
+
+    <!-- Boolean indicating if current platform supports BLE peripheral mode -->
+    <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool>
+
+    <!-- Is the device capable of hot swapping an ICC Card -->
+    <bool name="config_hotswapCapable">true</bool>
+
+    <!-- If true, the screen can be rotated via the accelerometer in all 4
+         rotations as the default behavior. -->
+    <bool name="config_allowAllRotations">true</bool>
+
+    <!-- Integer parameters of the wifi to cellular handover feature
+         wifi should not stick to bad networks -->
+    <integer name="config_wifi_framework_wifi_score_bad_rssi_threshold_5GHz">-100</integer>
+    <integer name="config_wifi_framework_wifi_score_low_rssi_threshold_5GHz">-100</integer>
+    <integer name="config_wifi_framework_wifi_score_bad_rssi_threshold_24GHz">-100</integer>
+    <integer name="config_wifi_framework_wifi_score_low_rssi_threshold_24GHz">-100</integer>
+
+    <!-- Flag indicating if the speed up audio on mt call code should be executed -->
+    <bool name="config_speed_up_audio_on_mt_calls">true</bool>
+
+    <!-- Vibrator pattern for feedback about a long screen/key press -->
+    <integer-array name="config_longPressVibePattern">
+        <item>0</item>
+        <item>28</item>
+        <item>10</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for feedback about touching a virtual key -->
+    <integer-array name="config_virtualKeyVibePattern">
+        <item>0</item>
+        <item>28</item>
+        <item>8</item>
+    </integer-array>
+
+    <!-- Vibrator pattern for a very short but reliable vibration for soft keyboard tap -->
+    <integer-array name="config_keyboardTapVibePattern">
+        <item>28</item>
+    </integer-array>
+
+    <!-- Control the behavior when the user long presses the home button.
+            0 - Nothing
+            1 - Menu key
+            2 - Recent apps view in SystemUI
+            3 - Launch assist intent
+            4 - Voice Search
+            5 - In-app Search
+         This needs to match the constants in
+         policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
+    -->
+    <integer name="config_longPressOnHomeBehavior">3</integer>
+
+    <!-- Operating volatage for bluetooth controller. 0 by default-->
+    <integer name="config_bluetooth_operating_voltage_mv">3300</integer>
+
+    <!-- Enable overlay for all location components. -->
+    <string name="config_networkLocationProviderPackageName" translatable="false">com.qualcomm.location</string>
+    <string name="config_fusedLocationProviderPackageName" translatable="false">com.qualcomm.location</string>
+
+    <!--  Define Google play service package for FRP-->
+    <string name="config_persistentDataPackageName" translatable="false">com.google.android.gms</string>
+
+    <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently
+         in hardware. -->
+    <bool name="config_setColorTransformAccelerated">true</bool>
+
+    <!-- Default list of files pinned by the Pinner Service -->
+    <string-array translatable="false" name="config_defaultPinnerServiceFiles">
+        <item>"/system/framework/arm64/boot-framework.oat"</item>
+        <item>"/system/framework/arm64/boot-framework.vdex"</item>
+        <item>"/system/framework/oat/arm64/services.odex"</item>
+        <item>"/system/framework/oat/arm64/services.vdex"</item>
+        <item>"/system/framework/arm64/boot.oat"</item>
+        <item>"/system/framework/arm64/boot.vdex"</item>
+        <item>"/system/framework/arm64/boot-core-libart.oat"</item>
+        <item>"/system/framework/arm64/boot-core-libart.vdex"</item>
+    </string-array>
+
+    <!-- True if camera app should be pinned via Pinner Service -->
+    <bool name="config_pinnerCameraApp">true</bool>
+
+    <!-- Default value for led color when battery is low on charge -->
+    <integer name="config_notificationsBatteryLowARGB">0xFFFFFFFF</integer>
+
+    <!-- Default value for led color when battery is medium charged -->
+    <integer name="config_notificationsBatteryMediumARGB">0xFFFFFFFF</integer>
+
+    <!-- Default value for led color when battery is fully charged -->
+    <integer name="config_notificationsBatteryFullARGB">0xFFFFFFFF</integer>
 </resources>
diff --git a/overlay/frameworks/base/core/res/res/xml/power_profile.xml b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
index 39c08d7..5378c4e 100755..100644
--- a/overlay/frameworks/base/core/res/res/xml/power_profile.xml
+++ b/overlay/frameworks/base/core/res/res/xml/power_profile.xml
@@ -1,115 +1,52 @@
 <?xml version="1.0" encoding="utf-8"?>
-<!--
-    Copyright (c) 2016, The Linux Foundation. All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions are
-    met:
-        * Redistributions of source code must retain the above copyright
-          notice, this list of conditions and the following disclaimer.
-        * Redistributions in binary form must reproduce the above
-          copyright notice, this list of conditions and the following
-          disclaimer in the documentation and/or other materials provided
-          with the distribution.
-        * Neither the name of The Linux Foundation nor the names of its
-          contributors may be used to endorse or promote products derived
-          from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
-    WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
-    ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
-    BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-    OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-    IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
--->
-
-
 <device name="Android">
-  <!-- Most values are the incremental current used by a feature,
-       in mA (measured at nominal voltage).
-       The default values are deliberately incorrect dummy values.
-       OEM's must measure and provide actual values before
-       shipping a device.
-       Example real-world values are given in comments, but they
-       are totally dependent on the platform and can vary
-       significantly, so should be measured on the shipping platform
-       with a power meter. -->
-  <item name="none">0</item>
-  <item name="screen.on">63</item>  <!-- ~200mA -->
-  <item name="screen.full">261</item>  <!-- ~300mA -->
-
-  <!-- A list of heterogeneous CPU clusters, where the value for each cluster represents the
-       number of CPU cores for that cluster.
-
-       Ex:
-       <array name="cpu.clusters.cores">
-         <value>4</value> // cluster 0 has cpu0, cpu1, cpu2, cpu3
-         <value>2</value> // cluster 1 has cpu4, cpu5
-       </array> -->
-  <array name="cpu.clusters.cores">
-      <value>4</value> <!-- cluster 0 has cpu0, cpu1, cpu2, cpu3 -->
-      <value>4</value> <!-- cluster 1 has cpu4, cpu5, cpu6, cpu7 -->
-  </array>
-
-    <!-- Different CPU speeds for cluster 0 as reported in
-       /sys/devices/system/cpu/cpu0/cpufreq/stats/time_in_state.
-
-       There must be one of these for each cluster, labeled:
-       cpu.speeds.cluster0, cpu.speeds.cluster1, etc... -->
-  <array name="cpu.speeds.cluster0">
-      <value>633000</value>   <!-- 633  MHz CPU speed -->
-      <value>902000</value>   <!-- 902  MHz CPU speed -->
-      <value>1113000</value>  <!-- 1113 MHz CPU speed -->
-      <value>1401000</value>  <!-- 1401 MHz CPU speed -->
-      <value>1536000</value>  <!-- 1536 MHz CPU speed -->
-      <value>1747000</value>  <!-- 1747 MHz CPU speed -->
-      <value>1843000</value>  <!-- 1843 MHz CPU speed -->
-  </array>
-
-  <!-- Current at each CPU speed for cluster 0, as per 'cpu.speeds.cluster0'.
-       Like cpu.speeds.cluster0, there must be one of these present for
-       each heterogeneous CPU cluster. -->
-  <array name="cpu.active.cluster0">
-      <value>34</value>  <!-- ~34mA -->
-      <value>60</value>  <!-- ~60mA -->
-      <value>85</value>  <!-- ~85mA -->
-      <value>128</value>  <!-- ~128mA -->
-      <value>163</value>  <!-- ~163mA -->
-      <value>202</value>  <!-- ~202mA -->
-      <value>253</value>  <!-- ~253mA -->
-  </array>
-
-   <array name="cpu.speeds.cluster1">
-      <value>1113000</value>  <!-- 1113  MHz CPU speed -->
-      <value>1401000</value>  <!-- 1401  MHz CPU speed -->
-      <value>1747000</value>  <!-- 1747  MHz CPU speed -->
-      <value>1958000</value>  <!-- 1958  MHz CPU speed -->
-      <value>2150000</value>  <!-- 2150  MHz CPU speed -->
-  </array>
-
-  <!-- Current at each CPU speed for cluster 1, as per 'cpu.speeds.cluster1'.
-       Like cpu.speeds.cluster1, there must be one of these present for
-       each heterogeneous CPU cluster. -->
-  <array name="cpu.active.cluster1">
-      <value>226</value>  <!-- ~226mA -->
-      <value>331</value>  <!-- ~331mA -->
-      <value>497</value>  <!-- ~497mA -->
-      <value>614</value>  <!-- ~614mA -->
-      <value>777</value>  <!-- ~777mA -->
-
-  </array>
-
-  <!-- Current when CPU is awake -->
-  <item name="cpu.awake">1.6</item>
-  <!-- Current when CPU is idle -->
-  <item name="cpu.idle">0.1</item>
-
-  <!-- This is the battery capacity in mAh (measured at nominal voltage) -->
-  <item name="battery.capacity">1000</item>
-
+    <item name="screen.on">95</item>
+    <item name="screen.full">275</item>
+    <array name="cpu.clusters.cores">
+        <value>4</value>
+        <value>4</value>
+    </array>
+    <array name="cpu.speeds.cluster0">
+        <value>633000</value>
+        <value>902000</value>
+        <value>1113000</value>
+        <value>1401000</value>
+        <value>1536000</value>
+        <value>1747000</value>
+        <value>1843000</value>
+    </array>
+    <array name="cpu.active.cluster0">
+        <value>12</value>
+        <value>23</value>
+        <value>30</value>
+        <value>40</value>
+        <value>50</value>
+        <value>55</value>
+        <value>65</value>
+    </array>
+    <array name="cpu.speeds.cluster1">
+        <value>1113600</value>
+        <value>1401600</value>
+        <value>1747200</value>
+        <value>1958400</value>
+        <value>2150000</value>
+        <value>2208000</value>
+    </array>
+    <array name="cpu.active.cluster1">
+        <value>75</value>
+        <value>110</value>
+        <value>155</value>
+        <value>220</value>
+        <value>285</value>
+        <value>310</value>
+    </array>
+    <item name="cpu.awake">9</item>
+    <item name="cpu.idle">6</item>
+    <item name="battery.capacity">3010</item>
+    <item name="bluetooth.active">70</item>
+    <item name="bluetooth.at">2</item>
+    <item name="bluetooth.on">2</item>
+    <item name="wifi.on">2</item>
+    <item name="wifi.active">175</item>
+    <item name="wifi.scan">180</item>
 </device>
diff --git a/overlay/frameworks/base/packages/SettingsProvider/res/values/defaults.xml b/overlay/frameworks/base/packages/SettingsProvider/res/values/defaults.xml
new file mode 100644
index 0000000..bf10c07
--- /dev/null
+++ b/overlay/frameworks/base/packages/SettingsProvider/res/values/defaults.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+/**
+ * Copyright (c) 2015, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+-->
+<resources>
+
+    <!-- Set the automatic brightness mode on by default -->
+    <bool name="def_screen_brightness_automatic_mode">true</bool>
+
+</resources>
diff --git a/overlay/packages/services/Telecomm/res/values/config.xml b/overlay/packages/services/Telecomm/res/values/config.xml
new file mode 100644
index 0000000..49efa9c
--- /dev/null
+++ b/overlay/packages/services/Telecomm/res/values/config.xml
@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2015 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- Telecomm resources that may need to be customized
+     for different hardware or product builds. -->
+<resources>
+
+    <!-- Flag indicating if the tty is enabled -->
+    <bool name="tty_enabled">true</bool>
+
+</resources>
diff --git a/overlay/packages/services/Telephony/res/values/config.xml b/overlay/packages/services/Telephony/res/values/config.xml
new file mode 100644
index 0000000..d87c086
--- /dev/null
+++ b/overlay/packages/services/Telephony/res/values/config.xml
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2009 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- NOTE: Many variables that used to be in this file have been migrated to
+     CarrierConfigManager.java. Please consider whether new variables belong
+     there before adding to this file. Variables here should be more closely
+     related to devices than to networks. -->
+
+<!-- Phone app resources that may need to be customized
+     for different hardware or product builds. -->
+<resources>
+    <!-- Determine whether calls to mute the microphone in PhoneUtils
+         are routed through the android.media.AudioManager class (true) or through
+         the com.android.internal.telephony.Phone interface (false). -->
+    <bool name="send_mic_mute_to_AudioManager">true</bool>
+
+    <!-- Flag indicating if hac is enabled -->
+    <bool name="hac_enabled">true</bool>
+
+    <!-- Show enabled lte option for lte device -->
+    <bool name="config_enabled_lte" translatable="false">true</bool>
+
+    <!-- Show Preferred Network Type options in No SIM case -->
+    <bool name="config_no_sim_display_network_modes">true</bool>
+</resources>