## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) ## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) ############################################################################### # Application options # Logging Levels # NXPLOG_DEFAULT_LOGLEVEL 0x01 # ANDROID_LOG_DEBUG 0x03 # ANDROID_LOG_WARN 0x02 # ANDROID_LOG_ERROR 0x01 # ANDROID_LOG_SILENT 0x00 NXPLOG_EXTNS_LOGLEVEL=0x03 NXPLOG_NCIHAL_LOGLEVEL=0x03 NXPLOG_NCIX_LOGLEVEL=0x03 NXPLOG_NCIR_LOGLEVEL=0x03 NXPLOG_FWDNLD_LOGLEVEL=0x03 NXPLOG_TML_LOGLEVEL=0x03 ############################################################################### # Nfc Device Node name NXP_NFC_DEV_NODE="/dev/pn553" ############################################################################### # Extension for Mifare reader enable MIFARE_READER_ENABLE=0x01 ############################################################################### # Vzw Feature enable VZW_FEATURE_ENABLE=0x01 ############################################################################### # File name for Firmware NXP_FW_NAME="libpn553_fw.so" ############################################################################### # System clock source selection configuration #define CLK_SRC_XTAL 1 #define CLK_SRC_PLL 2 NXP_SYS_CLK_SRC_SEL=0x02 ############################################################################### # System clock frequency selection configuration #define CLK_FREQ_13MHZ 1 #define CLK_FREQ_19_2MHZ 2 #define CLK_FREQ_24MHZ 3 #define CLK_FREQ_26MHZ 4 #define CLK_FREQ_38_4MHZ 5 #define CLK_FREQ_52MHZ 6 NXP_SYS_CLK_FREQ_SEL=0x02 ############################################################################### # The timeout value to be used for clock request acknowledgment # min value = 0x01 to max = 0x06 NXP_SYS_CLOCK_TO_CFG=0x06 ############################################################################### # NXP proprietary settings NXP_ACT_PROP_EXTN={2F, 02, 00} ############################################################################### # NFC forum profile settings NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} ############################################################################### # NFCC Configuration Control # Allow NFCC to manage RF Config 0x01 # Don't allow NFCC to manage RF Config 0x00 NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} ############################################################################### # Standby enable settings #NXP_CORE_STANDBY={2F, 00, 01, 01} ############################################################################### # NXP TVDD configurations settings # Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, # out of them only one can be configured at a time. NXP_EXT_TVDD_CFG=0x02 ############################################################################### #config1:SLALM, 3.3V for both RM and CM NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} ############################################################################### #config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, #monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_1={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_2={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_3={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_4={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_5={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_6={ #} ############################################################################### # Set configuration optimization decision setting # Enable = 0x01 # Disable = 0x00 NXP_SET_CONFIG_ALWAYS=0x00 ############################################################################### # Core configuration extensions # It includes # Wired mode settings A0ED, A0EE # Tag Detector A040, A041, A043 # Low Power mode A007 # Clock settings A002, A003 # PbF settings A008 # Clock timeout settings A004 # eSE (SVDD) PWR REQ settings A0F2 # Window size A0D8 # DWP Speed A0D5 # How eSE connected to PN553 A012 # UICC2 bit rate A0D1 # SWP1A interface A0D4 # DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037 NXP_CORE_CONF_EXTN={20, 02, 29, 0A, A0, EC, 01, 01, A0, ED, 01, 01, A0, 5E, 01, 01, A0, 12, 01, 02, A0, 40, 01, 01, A0, D1, 01, 02, A0, D4, 01, 01, A0, 37, 01, 35, A0, D8, 01, 02, A0, D5, 01, 0A } # A0, F2, 01, 01, # A0, 40, 01, 01, # A0, 41, 01, 02, # A0, 43, 01, 04, # A0, 02, 01, 01, # A0, 03, 01, 11, # A0, 07, 01, 03, # A0, 08, 01, 01 # } ############################################################################### # Core configuration rf field filter settings to enable set to 01 to disable set # to 00 last bit NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } ############################################################################### # To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set # to 0x00 NXP_I2C_FRAGMENTATION_ENABLED=0x00 ############################################################################### # Core configuration settings NXP_CORE_CONF={ 20, 02, 31, 0F, 85, 01, 01, 28, 01, 00, 21, 01, 00, 30, 01, 08, 31, 01, 03, 32, 01, 60, 38, 01, 01, 33, 04, 01, 02, 03, 04, 54, 01, 06, 50, 01, 02, 5B, 01, 00, 80, 01, 01, 81, 01, 01, 82, 01, 0E, 18, 01, 01 } ############################################################################### # Mifare Classic Key settings #NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, # A0, 52, 06, D3, F7, D3, F7, D3, F7, # A0, 53, 06, FF, FF, FF, FF, FF, FF, # A0, 54, 06, 00, 00, 00, 00, 00, 00} ############################################################################### # Default SE Options # No secure element 0x00 # eSE 0x01 # UICC 0x02 # UICC2 0x04 NXP_DEFAULT_SE=0x07 ############################################################################### #Enable SWP full power mode when phone is power off NXP_SWP_FULL_PWR_ON=0x00 ############################################################################### #### Select the CHIP #### #PN547C2 0x01 #PN65T 0x02 #PN548AD 0x03 #PN66T 0x04 #PN551 0x05 #PN67T 0x06 #PN553 0x07 #PN80T 0x08 NXP_NFC_CHIP=0x08 ############################################################################### # CE when Screen state is locked # This setting is for DEFAULT_AID_ROUTE, # DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE # Disable 0x00 # Enable 0x01 NXP_CE_ROUTE_STRICT_DISABLE=0x01 ############################################################################### #Timeout in secs to get NFCEE Discover notification NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 ############################################################################### NXP_DEFAULT_NFCEE_TIMEOUT=20 ############################################################################### #Timeout in secs NXP_SWP_RD_START_TIMEOUT=0x0A ############################################################################### #Timeout in secs NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 ############################################################################### #Set the default AID route Location : #This settings will be used when application does not set this parameter # host 0x00 # eSE 0x01 # UICC 0x02 # UICC2 0x03 DEFAULT_AID_ROUTE=0x00 ############################################################################### #Set the Mifare Desfire route Location : #This settings will be used when application does not set this parameter # host 0x00 # eSE 0x01 # UICC 0x02 # UICC2 0x03 DEFAULT_DESFIRE_ROUTE=0x02 ############################################################################### #Set the Mifare CLT route Location : #This settings will be used when application does not set this parameter # host 0x00 # eSE 0x01 # UICC 0x02 # UICC2 0x03 DEFAULT_MIFARE_CLT_ROUTE=0x02 ############################################################################### #Set the Felica CLT route Location : #This settings will be used when application does not set this parameter # eSE 0x01 # UICC 0x02 # UICC2 0x03 DEFAULT_FELICA_CLT_ROUTE=0x01 ############################################################################### #Set the default AID Power state : #This settings will be used when application does not set this parameter # bit pos 0 = Switch On # bit pos 1 = Switch Off # bit pos 2 = Battery Off # bit pos 3 = Screen Lock # bit pos 4 = Screen Off DEFAULT_AID_PWR_STATE=0x19 ############################################################################### #Set the Mifare Desfire Power state : #This settings will be used when application does not set this parameter # bit pos 0 = Switch On # bit pos 1 = Switch Off # bit pos 2 = Battery Off # bit pos 3 = Screen Lock # bit pos 4 = Screen Off DEFAULT_DESFIRE_PWR_STATE=0x1B ############################################################################### #Set the Mifare CLT Power state : #This settings will be used when application does not set this parameter # bit pos 0 = Switch On # bit pos 1 = Switch Off # bit pos 2 = Battery Off # bit pos 3 = Screen Lock # bit pos 4 = Screen Off DEFAULT_MIFARE_CLT_PWR_STATE=0x1B ############################################################################### #Set the Felica CLT Power state : #This settings will be used when application does not set this parameter # bit pos 0 = Switch On # bit pos 1 = Switch Off # bit pos 2 = Battery Off # bit pos 3 = Screen Lock # bit pos 4 = Screen Off DEFAULT_FELICA_CLT_PWR_STATE=0x1B ############################################################################### # AID Matching platform options # AID_MATCHING_L 0x01 # AID_MATCHING_K 0x02 AID_MATCHING_PLATFORM=0x01 ############################################################################### # P61 interface options # NFC 0x01 # SPI 0x02 NXP_P61_LS_DEFAULT_INTERFACE=0x01 ############################################################################### # P61 LTSM interface options # NFC 0x01 # SPI 0x02 NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 ############################################################################### #CHINA_TIANJIN_RF_SETTING #Enable 0x01 #Disable 0x00 NXP_CHINA_TIANJIN_RF_ENABLED=0x01 ############################################################################### #SWP_SWITCH_TIMEOUT_SETTING # Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. # Timeout in milliseconds, for example # No Timeout 0x00 # 10 millisecond timeout 0x0A NXP_SWP_SWITCH_TIMEOUT=0x0A ############################################################################### # P61 interface options for JCOP Download # NFC 0x01 # SPI 0x02 NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 ############################################################################### # P61 JCOP OS download options # FRAMEWORK API BY APPLICATION 0x00 # AT BOOT_TIME 0x01 NXP_JCOPDL_AT_BOOT_ENABLE=0x00 ############################################################################### # Loader service version # NFC service checks for LS version 2.0 or 2.1 # LS2.0 0x20 # LS2.1 0x21 # LS2.2 0x22 # AT NFC service intialization NXP_LOADER_SERVICE_VERSION=0x22 ############################################################################### #Timeout value in milliseconds for NFCC standby mode.The range is between 5000 #msec to 20000 msec and zero is to disable. NXP_NFCC_STANDBY_TIMEOUT=20000 ############################################################################### #Dynamic RSSI feature enable # Disable 0x00 # Enable 0x01 NXP_AGC_DEBUG_ENABLE=0x00 ############################################################################### #Virtual Mode ESE and Wired Mode ongoing delay Wired Mode # For Technology routing to ESE Technology Mask = 4 # For ISO-DEP Protocol routing to ESE Mask = 2 # It can also take TECH|PROTO = 6 # To ignore the delay set mask to = 0 NXP_ESE_WIRED_PRT_MASK=0x00 ############################################################################### #Virtual Mode UICC and Wired Mode ongoing delay Wired Mode #For Technology routing to UICC Technology Mask = 4 #For ISO-DEP Protocol routing to UICC set Mask = 2 #For Select AID Routing to UICC set Mask = 1 #It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay #set mask = 0 NXP_UICC_WIRED_PRT_MASK=0x00 ################################################################################ #RF field true delay Wired Mode # delay wired mode = 1 # allow wired mode = 0 NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 ############################################################################### #Config to allow adding aids #NFC on/off is required after this config #1 = enabling adding aid to NFCC routing table. #0 = disabling adding aid to NFCC routing table. NXP_ENABLE_ADD_AID=0x01 ############################################################################### # JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal # JCOP CP TIMEOUT NXP_CP_TIMEOUT={00, 77} ############################################################################### # Enable/Disable checking default proto SE Id # Disable 0x00 # Enable 0x01 NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 ############################################################################### #NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE #Enable/Disable block number checks for china transit use case #Enable 0x01 #Disable 0x00 NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 ############################################################################### # Wired mode resume timeout vaule in wired mode resume feature enable # DWP resume time out in ms( 4 bytes hex value and LSB first) #example 1000 = 0x03E8 #exmaple 2000 = 0x07D0 #example 500 = 0x01F4 NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00} ############################################################################### # Power to eSE is controlled by DH or PMU depending on following configurations #define DH_PWR_CONTROL 1 #define PMU_PWR_CONTROL 2 NXP_ESE_POWER_DH_CONTROL=1 ############################################################################### # Timeout value in milliseconds for wired mode resume after RF field event timeout NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000 ############################################################################### # NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured # External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1 # External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2 NXP_ESE_POWER_EXT_PMU=2 ############################################################################### # Whether to allow wired mode in desfire and mifare CLT # Disable 0x00 # Enable 0x01 NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00 ############################################################################### # Restrict routing to first matched rule only. # Blacklist enable 0x01 # Blacklist disable 0x00 NXP_PROP_BLACKLIST_ROUTING=0x00 ############################################################################### # Send DWP interface reset command as part of SE open # Disable 0x00 # Enable 0x01 NXP_DWP_INTF_RESET_ENABLE=0x01 ############################################################################### # Timeout value in milliseconds for JCOP OS download to complete OS_DOWNLOAD_TIMEOUT_VALUE=60000 ############################################################################### # Timeout value in milliseconds to send response for Felica command received NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 ###############################################################################