## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn54x) ## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn54x) ############################################################################### # Application options # Logging Levels # NXPLOG_DEFAULT_LOGLEVEL 0x01 # ANDROID_LOG_DEBUG 0x03 # ANDROID_LOG_WARN 0x02 # ANDROID_LOG_ERROR 0x01 # ANDROID_LOG_SILENT 0x00 # NXPLOG_EXTNS_LOGLEVEL=0x03 NXPLOG_NCIHAL_LOGLEVEL=0x03 NXPLOG_NCIX_LOGLEVEL=0x03 NXPLOG_NCIR_LOGLEVEL=0x03 NXPLOG_FWDNLD_LOGLEVEL=0x03 NXPLOG_TML_LOGLEVEL=0x03 ############################################################################### # Nfc Device Node name NXP_NFC_DEV_NODE="/dev/pn54x" ############################################################################### # Extension for Mifare reader enable MIFARE_READER_ENABLE=0x01 ############################################################################### # Vzw Feature enable VZW_FEATURE_ENABLE=0x01 ############################################################################### # File name for Firmware NXP_FW_NAME="libpn547_fw.so" ############################################################################### # System clock source selection configuration #define CLK_SRC_XTAL 1 #define CLK_SRC_PLL 2 NXP_SYS_CLK_SRC_SEL=0x01 ############################################################################### # System clock frequency selection configuration #define CLK_FREQ_13MHZ 1 #define CLK_FREQ_19_2MHZ 2 #define CLK_FREQ_24MHZ 3 #define CLK_FREQ_26MHZ 4 #define CLK_FREQ_38_4MHZ 5 #define CLK_FREQ_52MHZ 6 NXP_SYS_CLK_FREQ_SEL=0x00 ############################################################################### # The timeout value to be used for clock request acknowledgment # min value = 0x01 to max = 0x06 NXP_SYS_CLOCK_TO_CFG=0x01 ############################################################################### # NXP proprietary settings NXP_ACT_PROP_EXTN={2F, 02, 00} ############################################################################### # NFC forum profile settings NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} ############################################################################### # Standby enable settings NXP_CORE_STANDBY={2F, 00, 01, 01} ############################################################################### #Atonomous Mode #Enable 0x01 #Disable 0x00 NXP_CORE_SCRN_OFF_AUTONOMOUS_ENABLE=0x00 ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform # NXP_RF_CONF_BLK_1={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_2={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_3={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_4={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_5={ #} ############################################################################### # NXP RF configuration ALM/PLM settings # This section needs to be updated with the correct values based on the platform #NXP_RF_CONF_BLK_6={ #} ############################################################################### # Core configuration extensions # It includes # Wired mode settings A0ED, A0EE # Tag Detector A040, A041, A043 # Low Power mode A007 # Clock settings A002, A003 # PbF settings A008 NXP_CORE_CONF_EXTN={20, 02, 1A, 05, A0, EC, 01, 01, A0, ED, 01, 01, A0, 5E, 01, 01, A0, 12, 01, 02, A0, 0D, 06, 3E, 2D, 15, 88, 15, 00 } ############################################################################### # Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01 } ############################################################################### # To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00 NXP_I2C_FRAGMENTATION_ENABLED=0x00 ############################################################################### # Core configuration settings NXP_CORE_CONF={ 20, 02, 2B, 0D, 28, 01, 00, 21, 01, 00, 30, 01, 08, 31, 01, 03, 33, 04, 01, 02, 03, 04, 54, 01, 06, 50, 01, 02, 5B, 01, 00, 60, 01, 0E, 80, 01, 01, 81, 01, 01, 82, 01, 0E, 18, 01, 01 } ############################################################################### # Mifare Classic Key settings #NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, # A0, 52, 06, D3, F7, D3, F7, D3, F7, # A0, 53, 06, FF, FF, FF, FF, FF, FF, # A0, 54, 06, 00, 00, 00, 00, 00, 00} ############################################################################### # Default SE Options # No secure element 0x00 # eSE 0x01 # UICC 0x02 NXP_DEFAULT_SE=0x02 NXP_DEFAULT_NFCEE_TIMEOUT=0x06 ############################################################################### #Enable SWP full power mode when phone is power off NXP_SWP_FULL_PWR_ON=0x01 ############################################################################### #Set the default AID route Location : #This settings will be used when application does not set this parameter # host 0x00 # eSE 0x01 # UICC 0x02 DEFAULT_AID_ROUTE=0x00 ############################################################################### #Set the Mifare Desfire route Location : #This settings will be used when application does not set this parameter # host 0x00 # eSE 0x01 # UICC 0x02 DEFAULT_DESFIRE_ROUTE=0x02 ############################################################################### #Set the Mifare CLT route Location : #This settings will be used when application does not set this parameter # host 0x00 # eSE 0x01 # UICC 0x02 DEFAULT_MIFARE_CLT_ROUTE=0x02 ############################################################################## #### Select the CHIP #### #PN547C2 0x01 #PN65T 0x02 #PN548AD 0x03 #PN66T 0x04 NXP_NFC_CHIP=0x02 #Timeout in secs NXP_SWP_RD_START_TIMEOUT=0xFF #Timeout in secs NXP_SWP_RD_TAG_OP_TIMEOUT=0xFF ############################################################################### # CE when Screen state is locked # Disable 0x00 # Enable 0x01 NXP_CE_ROUTE_STRICT_DISABLE=0x01 ############################################################################### # AID Matching platform options # AID_MATCHING_L 0x01 # AID_MATCHING_K 0x02 AID_MATCHING_PLATFORM=0x01 ############################################################################### # P61 interface options # NFC 0x01 # SPI 0x02 NXP_P61_LS_DEFAULT_INTERFACE=0x01 ############################################################################### # P61 LTSM interface options # NFC 0x01 # SPI 0x02 NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 ############################################################################### #CHINA_TIANJIN_RF_SETTING #Enable 0x01 #Disable 0x00 NXP_CHINA_TIANJIN_RF_ENABLED=0x01 ############################################################################### #SWP_SWITCH_TIMEOUT_SETTING # Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. # Timeout in milliseconds, for example # No Timeout 0x00 # 10 millisecond timeout 0x0A NXP_SWP_SWITCH_TIMEOUT=0x0A ############################################################################### # P61 interface options for JCOP Download # NFC 0x01 # SPI 0x02 NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 ############################################################################### # P61 JCOP OS download options # FRAMEWORK API BY APPLICATION 0x00 # AT BOOT_TIME 0x01 NXP_JCOPDL_AT_BOOT_ENABLE=0x00 ############################################################################### # Loader service version # NFC service checks for LS version 2.0 or 2.1 # LS2.0 0x20 # LS2.1 0x21 # LS2.2 0x22 # AT NFC service intialization NXP_LOADER_SERVICE_VERSION=0x21