From 18d0e10d882285f2a2b51646d414309b16c696e0 Mon Sep 17 00:00:00 2001 From: Arian Date: Mon, 30 Sep 2019 11:20:20 +0200 Subject: shinano-common: pn54x: Drop unused example configs Change-Id: I3c24076930fd7e4698ab21607e9ca92c08160d26 --- pn54x/libnfc-brcm_NCI2_0.conf | 407 ------------------------ pn54x/libnfc-nxp-PN548AD_example.conf | 271 ---------------- pn54x/libnfc-nxp-PN551_example.conf | 273 ---------------- pn54x/libnfc-nxp-PN553_example.conf | 447 -------------------------- pn54x/libnfc-nxp-PN553_example_NCI2_0.conf | 449 -------------------------- pn54x/libnfc-nxp-PN65T_example.conf | 273 ---------------- pn54x/libnfc-nxp-PN66T_example.conf | 305 ------------------ pn54x/libnfc-nxp-PN80T_example.conf | 487 ---------------------------- pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf | 488 ----------------------------- 9 files changed, 3400 deletions(-) delete mode 100644 pn54x/libnfc-brcm_NCI2_0.conf delete mode 100644 pn54x/libnfc-nxp-PN548AD_example.conf delete mode 100644 pn54x/libnfc-nxp-PN551_example.conf delete mode 100644 pn54x/libnfc-nxp-PN553_example.conf delete mode 100644 pn54x/libnfc-nxp-PN553_example_NCI2_0.conf delete mode 100644 pn54x/libnfc-nxp-PN65T_example.conf delete mode 100644 pn54x/libnfc-nxp-PN66T_example.conf delete mode 100644 pn54x/libnfc-nxp-PN80T_example.conf delete mode 100644 pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf (limited to 'pn54x') diff --git a/pn54x/libnfc-brcm_NCI2_0.conf b/pn54x/libnfc-brcm_NCI2_0.conf deleted file mode 100644 index a4d3290..0000000 --- a/pn54x/libnfc-brcm_NCI2_0.conf +++ /dev/null @@ -1,407 +0,0 @@ -###################### Start of libnfc-brcm.conf ####################### - -############################################################################### -# Application options -APPL_TRACE_LEVEL=0xFF -PROTOCOL_TRACE_LEVEL=0xFFFFFFFF - -############################################################################### -# performance measurement -# Change this setting to control how often USERIAL log the performance (throughput) -# data on read/write/poll -# defailt is to log performance dara for every 100 read or write -#REPORT_PERFORMANCE_MEASURE=100 - -############################################################################### -# File used for NFA storage -NFA_STORAGE="/data/nfc" - -############################################################################### -# Snooze Mode Settings -# -# By default snooze mode is enabled. Set SNOOZE_MODE_CFG byte[0] to 0 -# to disable. -# -# If SNOOZE_MODE_CFG is not provided, the default settings are used: -# They are as follows: -# 8 Sleep Mode (0=Disabled 1=UART 8=SPI/I2C) -# 0 Idle Threshold Host -# 0 Idle Threshold HC -# 0 NFC Wake active mode (0=ActiveLow 1=ActiveHigh) -# 1 Host Wake active mode (0=ActiveLow 1=ActiveHigh) -# -#SNOOZE_MODE_CFG={08:00:00:00:01} - -############################################################################### -# Insert a delay in milliseconds after NFC_WAKE and before write to NFCC -#NFC_WAKE_DELAY=20 - -############################################################################### -# Various Delay settings (in ms) used in USERIAL -# POWER_ON_DELAY -# Delay after turning on chip, before writing to transport (default 300) -# PRE_POWER_OFF_DELAY -# Delay after deasserting NFC-Wake before turn off chip (default 0) -# POST_POWER_OFF_DELAY -# Delay after turning off chip, before USERIAL_close returns (default 0) -# -#POWER_ON_DELAY=300 -#PRE_POWER_OFF_DELAY=0 -#POST_POWER_OFF_DELAY=0 - -############################################################################### -# Maximum time (ms) to wait for RESET NTF after setting REG_PU to high -# The default is 1000. -#NFCC_ENABLE_TIMEOUT=0 - -############################################################################### -# LPTD mode configuration -# byte[0] is the length of the remaining bytes in this value -# if set to 0, LPTD params will NOT be sent to NFCC (i.e. disabled). -# byte[1] is the param id it should be set to B9. -# byte[2] is the length of the LPTD parameters -# byte[3] indicates if LPTD is enabled -# if set to 0, LPTD will be disabled (parameters will still be sent). -# byte[4-n] are the LPTD parameters. -# By default, LPTD is enabled and default settings are used. -# See nfc_hal_dm_cfg.c for defaults -#LPTD_CFG={23:B9:21:01:02:FF:FF:04:A0:0F:40:00:80:02:02:10:00:00:00:31:0C:30:00:00:00:00:00:00:00:00:00:00:00:00:00:00} - -############################################################################### -# Startup Configuration (100 bytes maximum) -# -# For the 0xCA parameter, byte[9] (marked by 'AA') is for UICC0, and byte[10] (marked by BB) is -# for UICC1. The values are defined as: -# 0 : UICCx only supports ISO_DEP in low power mode. -# 2 : UICCx only supports Mifare in low power mode. -# 3 : UICCx supports both ISO_DEP and Mifare in low power mode. -# -# AA BB -#NFA_DM_START_UP_CFG={1F:CB:01:01:A5:01:01:CA:14:00:00:00:00:06:E8:03:00:00:00:00:00:00:00:00:00:00:00:00:00:80:01:01} - -############################################################################### -# Startup Vendor Specific Configuration (100 bytes maximum); -# byte[0] TLV total len = 0x5 -# byte[1] NCI_MTS_CMD|NCI_GID_PROP = 0x2f -# byte[2] NCI_MSG_FRAME_LOG = 0x9 -# byte[3] 2 -# byte[4] 0=turn off RF frame logging; 1=turn on -# byte[5] 0=turn off SWP frame logging; 1=turn on -# NFA_DM_START_UP_VSC_CFG={05:2F:09:02:01:01} - -############################################################################### -# Antenna Configuration - This data is used when setting 0xC8 config item -# at startup (before discovery is started). If not used, no value is sent. -# -# The settings for this value are documented here: -# http://wcgbu.broadcom.com/wpan/PM/Project%20Document%20Library/bcm20791B0/ -# Design/Doc/PHY%20register%20settings/BCM20791-B2-1027-02_PHY_Recommended_Reg_Settings.xlsx -# This document is maintained by Paul Forshaw. -# -# The values marked as ?? should be tweaked per antenna or customer/app: -# {20:C8:1E:06:??:00:??:??:??:00:??:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:??:01:00:00:40:04} -# array[0] = 0x20 is length of the payload from array[1] to the end -# array[1] = 0xC8 is PREINIT_DSP_CFG -#PREINIT_DSP_CFG={20:C8:1E:06:1F:00:0F:03:3C:00:04:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:48:01:00:00:40:04} - -############################################################################### -# Configure crystal frequency when internal LPO can't detect the frequency. -#XTAL_FREQUENCY=0 -############################################################################### -# Configure the default Destination Gate used by HCI (the default is 4, which -# is the ETSI loopback gate. -NFA_HCI_DEFAULT_DEST_GATE=0xF0 - -############################################################################### -# Configure the single default SE to use. The default is to use the first -# SE that is detected by the stack. This value might be used when the phone -# supports multiple SE (e.g. 0xF3 and 0xF4) but you want to force it to use -# one of them (e.g. 0xF4). -#ACTIVE_SE=0xF3 - -############################################################################### -# Configure the default NfcA/IsoDep techology and protocol route. Can be -# either a secure element (e.g. 0xF4) or the host (0x00) -#DEFAULT_ISODEP_ROUTE=0x00 - -############################################################################### -# Configure the NFC Extras to open and use a static pipe. If the value is -# not set or set to 0, then the default is use a dynamic pipe based on a -# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value -# for each UICC (where F3="UICC0" and F4="UICC1") -#NFA_HCI_STATIC_PIPE_ID_F3=0x70 -#NFA_HCI_STATIC_PIPE_ID_01=0x19 -NFA_HCI_STATIC_PIPE_ID_C0=0x19 -############################################################################### -# When disconnecting from Oberthur secure element, perform a warm-reset of -# the secure element to deselect the applet. -# The default hex value of the command is 0x3. If this variable is undefined, -# then this feature is not used. -#OBERTHUR_WARM_RESET_COMMAND=0x03 - -############################################################################### -# Force UICC to only listen to the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F -UICC_LISTEN_TECH_MASK=0x07 - -############################################################################### -# Force HOST listen feature enable or disable. -# 0: Disable -# 1: Enable -HOST_LISTEN_ENABLE=0x01 - -############################################################################### -# Enabling/Disabling Forward functionality -# Disable 0x00 -# Enable 0x01 -NXP_FWD_FUNCTIONALITY_ENABLE=0x01 - -############################################################################### -# Allow UICC to be powered off if there is no traffic. -# Timeout is in ms. If set to 0, then UICC will not be powered off. -#UICC_IDLE_TIMEOUT=30000 -UICC_IDLE_TIMEOUT=0 - -############################################################################### -# AID for Empty Select command -# If specified, this AID will be substituted when an Empty SELECT command is -# detected. The first byte is the length of the AID. Maximum length is 16. -AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00} -############################################################################### -# Maximum Number of Credits to be allowed by the NFCC -# This value overrides what the NFCC specifices allowing the host to have -# the control to work-around transport limitations. If this value does -# not exist or is set to 0, the NFCC will provide the number of credits. -MAX_RF_DATA_CREDITS=1 - -############################################################################### -# This setting allows you to disable registering the T4t Virtual SE that causes -# the NFCC to send PPSE requests to the DH. -# The default setting is enabled (i.e. T4t Virtual SE is registered). -#REGISTER_VIRTUAL_SE=1 - -############################################################################### -# When screen is turned off, specify the desired power state of the controller. -# 0: power-off-sleep state; DEFAULT -# 1: full-power state -# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) -SCREEN_OFF_POWER_STATE=1 - -############################################################################### -# Firmware patch file -# If the value is not set then patch download is disabled. -#FW_PATCH="/vendor/firmware/bcm2079x_firmware.ncd" - -############################################################################### -# Firmware pre-patch file (sent before the above patch file) -# If the value is not set then pre-patch is not used. -#FW_PRE_PATCH="/vendor/firmware/bcm2079x_pre_firmware.ncd" - -############################################################################### -# Firmware patch format -# 1 = HCD -# 2 = NCD (default) -#NFA_CONFIG_FORMAT=2 - -############################################################################### -# SPD Debug mode -# If set to 1, any failure of downloading a patch will trigger a hard-stop -#SPD_DEBUG=0 - -############################################################################### -# SPD Max Retry Count -# The number of attempts to download a patch before giving up (defualt is 3). -# Note, this resets after a power-cycle. -#SPD_MAX_RETRY_COUNT=3 - -############################################################################### -# transport driver -# -# TRANSPORT_DRIVER= -# -# where can be, for example: -# "/dev/ttyS" (UART) -# "/dev/bcmi2cnfc" (I2C) -# "hwtun" (HW Tunnel) -# "/dev/bcmspinfc" (SPI) -# "/dev/btusb0" (BT USB) -#TRANSPORT_DRIVER="/dev/bcm2079x-i2c" - -############################################################################### -# power control driver -# Specify a kernel driver that support ioctl commands to control NFC_EN and -# NFC_WAKE gpio signals. -# -# POWER_CONTRL_DRIVER= -# where can be, for example: -# "/dev/nfcpower" -# "/dev/bcmi2cnfc" (I2C) -# "/dev/bcmspinfc" (SPI) -# i2c and spi driver may be used to control NFC_EN and NFC_WAKE signal -#POWER_CONTROL_DRIVER="/dev/bcm2079x-i2c" - -############################################################################### -# I2C transport driver options -# Mako does not support 10-bit I2C addresses -# Revert to 7-bit address -#BCMI2CNFC_ADDRESS=0x77 - -############################################################################### -# I2C transport driver try to read multiple packets in read() if data is available -# remove the comment below to enable this feature -#READ_MULTIPLE_PACKETS=1 - -############################################################################### -# SPI transport driver options -#SPI_NEGOTIATION={0A:F0:00:01:00:00:00:FF:FF:00:00} - -############################################################################### -# UART transport driver options -# -# PORT=1,2,3,... -# BAUD=115200, 19200, 9600, 4800, -# DATABITS=8, 7, 6, 5 -# PARITY="even" | "odd" | "none" -# STOPBITS="0" | "1" | "1.5" | "2" - -#UART_PORT=2 -#UART_BAUD=115200 -#UART_DATABITS=8 -#UART_PARITY="none" -#UART_STOPBITS="1" - -############################################################################### -# Insert a delay in microseconds per byte after a write to NFCC. -# after writing a block of data to the NFCC, delay this an amopunt of time before -# writing next block of data. the delay is calculated as below -# NFC_WRITE_DELAY * (number of byte written) / 1000 milliseconds -# e.g. after 259 bytes is written, delay (259 * 20 / 1000) 5 ms before next write -#NFC_WRITE_DELAY=20 - -############################################################################### -# Maximum Number of Credits to be allowed by the NFCC -# This value overrides what the NFCC specifices allowing the host to have -# the control to work-around transport limitations. If this value does -# not exist or is set to 0, the NFCC will provide the number of credits. -MAX_RF_DATA_CREDITS=1 - -############################################################################### -# Default poll duration (in ms) -# The defualt is 500ms if not set (see nfc_target.h) -#NFA_DM_DISC_DURATION_POLL=333 -############################################################################### -# Antenna Configuration - This data is used when setting 0xC8 config item -# at startup (before discovery is started). If not used, no value is sent. -# -# The settings for this value are documented here: -# http://wcgbu.broadcom.com/wpan/PM/Project%20Document%20Library/bcm20791B0/ -# Design/Doc/PHY%20register%20settings/BCM20791-B2-1027-02_PHY_Recommended_Reg_Settings.xlsx -# This document is maintained by Paul Forshaw. -# -# The values marked as ?? should be tweaked per antenna or customer/app: -# {20:C8:1E:06:??:00:??:??:??:00:??:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:??:01:00:00:40:04} -# array[0] = 0x20 is length of the payload from array[1] to the end -# array[1] = 0xC8 is PREINIT_DSP_CFG -#PREINIT_DSP_CFG={20:C8:1E:06:1F:00:0F:03:3C:00:04:24:00:1C:00:75:00:77:00:76:00:1C:00:03:00:0A:00:48:01:00:00:40:04} - -############################################################################### -# Choose the presence-check algorithm for type-4 tag. If not defined, the default value is 1. -# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm -# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block -# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate -# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0 -# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3 -# 5 NFA_RW_PRES_CHK_ISO_DEP_NAK; Type - 4 tag protocol iso-dep nak presence check -# command is sent waiting for rsp and ntf. -PRESENCE_CHECK_ALGORITHM=5 - -############################################################################### -# Force tag polling for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | -# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | -# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO | -#NFA_TECHNOLOGY_MASK_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */ -# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ -POLLING_TECH_MASK=0x6F - -############################################################################### -# Force P2P to only listen for the following technology(s). -# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. -# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F | -#NFA_TECHNOLOGY_MASK_ACTIVE -# -# Notable bits: -# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ -# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ -#NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */ -P2P_LISTEN_TECH_MASK=0x45 - -PRESERVE_STORAGE=0x01 - -############################################################################### -# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. -# The value is set to 3 by default as it assumes we will discover 0xF2, -# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced -# so that the stack will not wait any longer than necessary. - -# Maximum EE supported number -# NXP PN547C2 0x02 -# NXP PN65T 0x03 -# NXP PN548C2 0x02 -# NXP PN66T 0x03 -NFA_MAX_EE_SUPPORTED=0x02 - -############################################################################### -# NCI Hal Module name -NCI_HAL_MODULE="nfc_nci" - -############################################################################## -# Deactivate notification wait time out in seconds used in ETSI Reader mode -# 0 - Infinite wait -#NFA_DM_DISC_NTF_TIMEOUT=0 - -############################################################################### -# AID_MATCHING constants -# AID_MATCHING_EXACT_ONLY 0x00 -# AID_MATCHING_EXACT_OR_PREFIX 0x01 -# AID_MATCHING_PREFIX_ONLY 0x02 -# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 -AID_MATCHING_MODE=0x03 - -############################################################################### -# Default Secure Element route id -DEFAULT_OFFHOST_ROUTE=0x02 - -############################################################################### -# Vendor Specific Proprietary Protocol & Discovery Configuration -# Set to 0xFF if unsupported -# byte[0] NCI_PROTOCOL_18092_ACTIVE -# byte[1] NCI_PROTOCOL_B_PRIME -# byte[2] NCI_PROTOCOL_DUAL -# byte[3] NCI_PROTOCOL_15693 -# byte[4] NCI_PROTOCOL_KOVIO -# byte[5] NCI_PROTOCOL_MIFARE -# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO -# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME -# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME -NFA_PROPRIETARY_CFG={05:FF:FF:06:81:80:70:FF:FF} - -############################################################################### -# Bail out mode -# If set to 1, NFCC is using bail out mode for either Type A or Type B poll. -NFA_POLL_BAIL_OUT_MODE=0x01 -############################################################################### -# Enable/Disable Block Route feature. -# Block Route will restrict routing to first matched rule -# Block Route enable 0x01 -# Block Route disable 0x00 -NFA_BLOCK_ROUTE=0x00 diff --git a/pn54x/libnfc-nxp-PN548AD_example.conf b/pn54x/libnfc-nxp-PN548AD_example.conf deleted file mode 100644 index 53121b2..0000000 --- a/pn54x/libnfc-nxp-PN548AD_example.conf +++ /dev/null @@ -1,271 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn54x) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn54x) - -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -# -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn54x" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn548ad_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 - -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 - -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 - -NXP_SYS_CLOCK_TO_CFG=0x01 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, There are currently three -#configurations (1, 2 and 3) are supported, out of them only one can be -#supported. - -NXP_EXT_TVDD_CFG=0x01 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 02, 09, 00} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 4.7V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, 64, 0A} - -############################################################################### -#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC, -#DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 64, 0A} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -NXP_CORE_CONF_EXTN={20, 02, 19, 06, - A0, EC, 01, 01, - A0, ED, 01, 00, - A0, 5E, 01, 01, - A0, 40, 01, 01, - A0, DD, 01, 2D, - A0, 96, 01, 01 - } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01 - } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2E, 0E, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 - -NXP_DEFAULT_SE=0x03 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 - -NXP_NFC_CHIP=0x03 - -############################################################################### -# CE when Screen state is locked -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -NXP_DEFAULT_NFCEE_TIMEOUT=0x06 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A diff --git a/pn54x/libnfc-nxp-PN551_example.conf b/pn54x/libnfc-nxp-PN551_example.conf deleted file mode 100644 index ba42b20..0000000 --- a/pn54x/libnfc-nxp-PN551_example.conf +++ /dev/null @@ -1,273 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn54x) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn54x) - -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -# -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn544" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn551_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 - -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 - -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 - -NXP_SYS_CLOCK_TO_CFG=0x06 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, There are currently three -#configurations (1, 2 and 3) are supported, out of them only one can be -#supported. - -NXP_EXT_TVDD_CFG=0x01 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 02, 09, 00} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, 24, 08 } - -############################################################################### -#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC, -#DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 40, 0A} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -NXP_CORE_CONF_EXTN={20, 02, 19, 06, - A0, EC, 01, 01, - A0, ED, 01, 00, - A0, 5E, 01, 01, - A0, 40, 01, 01, - A0, DD, 01, 2D, - A0, 96, 01, 01 - } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01 - } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2E, 0E, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 - -NXP_DEFAULT_SE=0x03 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 - -NXP_NFC_CHIP=0x05 - -############################################################################### -# CE when Screen state is locked -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -NXP_DEFAULT_NFCEE_TIMEOUT=0x06 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A diff --git a/pn54x/libnfc-nxp-PN553_example.conf b/pn54x/libnfc-nxp-PN553_example.conf deleted file mode 100644 index 818e473..0000000 --- a/pn54x/libnfc-nxp-PN553_example.conf +++ /dev/null @@ -1,447 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn553" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn553_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 -NXP_SYS_CLOCK_TO_CFG=0x01 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -NXP_EXT_TVDD_CFG=0x02 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x00 - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -# eSE (SVDD) PWR REQ settings A0F2 -# How eSE connected to PN553 A012 -# UICC2 bit rate A0D1 -# SWP1A interface A0D4 -# DWP intf behavior config, SVDD Load activated by default if set to 0x31 - A037 -NXP_CORE_CONF_EXTN={20, 02, 25, 09, - A0, EC, 01, 01, - A0, ED, 01, 00, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, DD, 01, 2D, - A0, D1, 01, 02, - A0, D4, 01, 01, - A0, 37, 01, 35 - } -# A0, F2, 01, 01, -# A0, 40, 01, 01, -# A0, 41, 01, 02, -# A0, 43, 01, 04, -# A0, 02, 01, 01, -# A0, 03, 01, 11, -# A0, 07, 01, 03, -# A0, 08, 01, 01 -# } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set -# to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2E, 0E, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 - -NXP_DEFAULT_SE=0x07 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 -#PN553 0x07 -#PN80T 0x08 -NXP_NFC_CHIP=0x07 - -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -############################################################################### -NXP_DEFAULT_NFCEE_TIMEOUT=20 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_AID_PWR_STATE=0x19 - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_DESFIRE_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_MIFARE_CLT_PWR_STATE=0x1B - -############################################################################### -#Set the Felica CLT route Location : -#This settings will be used when application does not set this parameter -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_FELICA_CLT_ROUTE=0x01 - -############################################################################### -#Set the Felica CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_FELICA_CLT_PWR_STATE=0x1B - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x22 - -############################################################################### -#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 -#msec to 20000 msec and zero is to disable. -NXP_NFCC_STANDBY_TIMEOUT=20000 - -############################################################################### -#Dynamic RSSI feature enable -# Disable 0x00 -# Enable 0x01 -NXP_AGC_DEBUG_ENABLE=0x00 - -############################################################################### -#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode -# For Technology routing to ESE Technology Mask = 4 -# For ISO-DEP Protocol routing to ESE Mask = 2 -# It can also take TECH|PROTO = 6 -# To ignore the delay set mask to = 0 -NXP_ESE_WIRED_PRT_MASK=0x00 - -############################################################################### -#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode -#For Technology routing to UICC Technology Mask = 4 -#For ISO-DEP Protocol routing to UICC set Mask = 2 -#For Select AID Routing to UICC set Mask = 1 -#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay -#set mask = 0 -NXP_UICC_WIRED_PRT_MASK=0x00 - -############################################################################### -#RF field true delay Wired Mode -# delay wired mode = 1 -# allow wired mode = 0 -NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 - -############################################################################### -#Config to allow adding aids -#NFC on/off is required after this config -#1 = enabling adding aid to NFCC routing table. -#0 = disabling adding aid to NFCC routing table. -NXP_ENABLE_ADD_AID=0x01 - -############################################################################### -# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal -# JCOP CP TIMEOUT -NXP_CP_TIMEOUT={00, 77} - -############################################################################### -# Enable/Disable checking default proto SE Id -# Disable 0x00 -# Enable 0x01 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -############################################################################### -# Restrict routing to first matched rule only. -# Blacklist enable 0x01 -# Blacklist disable 0x00 -NXP_PROP_BLACKLIST_ROUTING=0x00 - -############################################################################### -# Timeout value in milliseconds to send response for Felica command received -NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 - -############################################################################### \ No newline at end of file diff --git a/pn54x/libnfc-nxp-PN553_example_NCI2_0.conf b/pn54x/libnfc-nxp-PN553_example_NCI2_0.conf deleted file mode 100644 index 3dca16e..0000000 --- a/pn54x/libnfc-nxp-PN553_example_NCI2_0.conf +++ /dev/null @@ -1,449 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn553" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn553_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 -NXP_SYS_CLOCK_TO_CFG=0x01 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -NXP_EXT_TVDD_CFG=0x02 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x00 - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -# eSE (SVDD) PWR REQ settings A0F2 -# How eSE connected to PN553 A012 -# UICC2 bit rate A0D1 -# SWP1A interface A0D4 -# DWP intf behavior config, SVDD Load activated by default if set to 0x31 - A037 -NXP_CORE_CONF_EXTN={20, 02, 25, 09, - A0, EC, 01, 01, - A0, ED, 01, 00, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, DD, 01, 2D, - A0, D1, 01, 02, - A0, D4, 01, 01, - A0, 37, 01, 35 - } -# A0, F2, 01, 01, -# A0, 40, 01, 01, -# A0, 41, 01, 02, -# A0, 43, 01, 04, -# A0, 02, 01, 01, -# A0, 03, 01, 11, -# A0, 07, 01, 03, -# A0, 08, 01, 01 -# } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set -# to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 34, 10, - 85, 01, 01, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01, - 68, 01, 00 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 - -NXP_DEFAULT_SE=0x07 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 -#PN553 0x07 -#PN80T 0x08 -NXP_NFC_CHIP=0x07 - -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -############################################################################### -NXP_DEFAULT_NFCEE_TIMEOUT=20 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_AID_PWR_STATE=0x19 - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_DESFIRE_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_MIFARE_CLT_PWR_STATE=0x1B - -############################################################################### -#Set the Felica CLT route Location : -#This settings will be used when application does not set this parameter -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_FELICA_CLT_ROUTE=0x01 - -############################################################################### -#Set the Felica CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_FELICA_CLT_PWR_STATE=0x1B - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x22 - -############################################################################### -#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 -#msec to 20000 msec and zero is to disable. -NXP_NFCC_STANDBY_TIMEOUT=20000 - -############################################################################### -#Dynamic RSSI feature enable -# Disable 0x00 -# Enable 0x01 -NXP_AGC_DEBUG_ENABLE=0x00 - -############################################################################### -#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode -# For Technology routing to ESE Technology Mask = 4 -# For ISO-DEP Protocol routing to ESE Mask = 2 -# It can also take TECH|PROTO = 6 -# To ignore the delay set mask to = 0 -NXP_ESE_WIRED_PRT_MASK=0x00 - -############################################################################### -#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode -#For Technology routing to UICC Technology Mask = 4 -#For ISO-DEP Protocol routing to UICC set Mask = 2 -#For Select AID Routing to UICC set Mask = 1 -#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay -#set mask = 0 -NXP_UICC_WIRED_PRT_MASK=0x00 - -############################################################################### -#RF field true delay Wired Mode -# delay wired mode = 1 -# allow wired mode = 0 -NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 - -############################################################################### -#Config to allow adding aids -#NFC on/off is required after this config -#1 = enabling adding aid to NFCC routing table. -#0 = disabling adding aid to NFCC routing table. -NXP_ENABLE_ADD_AID=0x01 - -############################################################################### -# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal -# JCOP CP TIMEOUT -NXP_CP_TIMEOUT={00, 77} - -############################################################################### -# Enable/Disable checking default proto SE Id -# Disable 0x00 -# Enable 0x01 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -############################################################################### -# Restrict routing to first matched rule only. -# Blacklist enable 0x01 -# Blacklist disable 0x00 -NXP_PROP_BLACKLIST_ROUTING=0x00 - -############################################################################### -# Timeout value in milliseconds to send response for Felica command received -NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 - -############################################################################### \ No newline at end of file diff --git a/pn54x/libnfc-nxp-PN65T_example.conf b/pn54x/libnfc-nxp-PN65T_example.conf deleted file mode 100644 index 317776c..0000000 --- a/pn54x/libnfc-nxp-PN65T_example.conf +++ /dev/null @@ -1,273 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn54x) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn54x) - -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -# -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn54x" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn547_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 - -NXP_SYS_CLK_SRC_SEL=0x01 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 - -NXP_SYS_CLK_FREQ_SEL=0x00 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 - -NXP_SYS_CLOCK_TO_CFG=0x01 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# Standby enable settings -NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -#Atonomous Mode -#Enable 0x01 -#Disable 0x00 -NXP_CORE_SCRN_OFF_AUTONOMOUS_ENABLE=0x00 - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -# NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -NXP_CORE_CONF_EXTN={20, 02, 1A, 05, - A0, EC, 01, 01, - A0, ED, 01, 01, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 0D, 06, 3E, 2D, 15, 88, 15, 00 - } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01 - } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2B, 0D, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 60, 01, 0E, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 - -NXP_DEFAULT_SE=0x02 - -NXP_DEFAULT_NFCEE_TIMEOUT=0x06 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################## -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 - -NXP_NFC_CHIP=0x02 - -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0xFF -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0xFF - -############################################################################### -# CE when Screen state is locked -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x21 diff --git a/pn54x/libnfc-nxp-PN66T_example.conf b/pn54x/libnfc-nxp-PN66T_example.conf deleted file mode 100644 index d63881f..0000000 --- a/pn54x/libnfc-nxp-PN66T_example.conf +++ /dev/null @@ -1,305 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn54x) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn54x) - -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -# -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn54x" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn548ad_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 - -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 - -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 - -NXP_SYS_CLOCK_TO_CFG=0x01 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, There are currently three -#configurations (1, 2 and 3) are supported, out of them only one can be -#supported. - -NXP_EXT_TVDD_CFG=0x01 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 02, 09, 00} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 4.7V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0B, 02, A0, 66, 01, 00, A0, 0E, 03, 56, 64, 0A} - -############################################################################### -#config3: use DCDC in CE, use Tx_Pwr_Req, SLALM, monitoring 5V from DCDC, -#DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_3={20, 02, 0B, 02, A0, 66, 01, 01, A0, 0E, 03, 52, 64, 0A} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -NXP_CORE_CONF_EXTN={20, 02, 1D, 07, - A0, EC, 01, 01, - A0, ED, 01, 03, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, DD, 01, 2D, - A0, F2, 01, 01 - } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 01 - } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2E, 0E, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 - -NXP_DEFAULT_SE=0x03 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 - -NXP_NFC_CHIP=0x04 - -############################################################################### -# CE when Screen state is locked -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -NXP_DEFAULT_NFCEE_TIMEOUT=0x06 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x21 diff --git a/pn54x/libnfc-nxp-PN80T_example.conf b/pn54x/libnfc-nxp-PN80T_example.conf deleted file mode 100644 index 45d276c..0000000 --- a/pn54x/libnfc-nxp-PN80T_example.conf +++ /dev/null @@ -1,487 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn553" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn553_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 -NXP_SYS_CLOCK_TO_CFG=0x06 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -NXP_EXT_TVDD_CFG=0x02 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x00 - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -# eSE (SVDD) PWR REQ settings A0F2 -# Window size A0D8 -# DWP Speed A0D5 -# How eSE connected to PN553 A012 -# UICC2 bit rate A0D1 -# SWP1A interface A0D4 -# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037 -NXP_CORE_CONF_EXTN={20, 02, 29, 0A, - A0, EC, 01, 01, - A0, ED, 01, 01, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, D1, 01, 02, - A0, D4, 01, 01, - A0, 37, 01, 35, - A0, D8, 01, 02, - A0, D5, 01, 0A - } -# A0, F2, 01, 01, -# A0, 40, 01, 01, -# A0, 41, 01, 02, -# A0, 43, 01, 04, -# A0, 02, 01, 01, -# A0, 03, 01, 11, -# A0, 07, 01, 03, -# A0, 08, 01, 01 -# } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set -# to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 2E, 0E, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 -NXP_DEFAULT_SE=0x07 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 -#PN553 0x07 -#PN80T 0x08 -NXP_NFC_CHIP=0x08 - -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -############################################################################### -NXP_DEFAULT_NFCEE_TIMEOUT=20 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -#Set the Felica CLT route Location : -#This settings will be used when application does not set this parameter -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_FELICA_CLT_ROUTE=0x01 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_AID_PWR_STATE=0x19 - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_DESFIRE_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_MIFARE_CLT_PWR_STATE=0x1B - -############################################################################### -#Set the Felica CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_FELICA_CLT_PWR_STATE=0x1B - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x22 - -############################################################################### -#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 -#msec to 20000 msec and zero is to disable. -NXP_NFCC_STANDBY_TIMEOUT=20000 - -############################################################################### -#Dynamic RSSI feature enable -# Disable 0x00 -# Enable 0x01 -NXP_AGC_DEBUG_ENABLE=0x00 - -############################################################################### -#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode -# For Technology routing to ESE Technology Mask = 4 -# For ISO-DEP Protocol routing to ESE Mask = 2 -# It can also take TECH|PROTO = 6 -# To ignore the delay set mask to = 0 -NXP_ESE_WIRED_PRT_MASK=0x00 - -############################################################################### -#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode -#For Technology routing to UICC Technology Mask = 4 -#For ISO-DEP Protocol routing to UICC set Mask = 2 -#For Select AID Routing to UICC set Mask = 1 -#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay -#set mask = 0 -NXP_UICC_WIRED_PRT_MASK=0x00 - -################################################################################ -#RF field true delay Wired Mode -# delay wired mode = 1 -# allow wired mode = 0 -NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 - -############################################################################### -#Config to allow adding aids -#NFC on/off is required after this config -#1 = enabling adding aid to NFCC routing table. -#0 = disabling adding aid to NFCC routing table. -NXP_ENABLE_ADD_AID=0x01 - -############################################################################### -# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal -# JCOP CP TIMEOUT -NXP_CP_TIMEOUT={00, 77} - -############################################################################### -# Enable/Disable checking default proto SE Id -# Disable 0x00 -# Enable 0x01 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -############################################################################### -# Wired mode resume timeout vaule in wired mode resume feature enable -# DWP resume time out in ms( 4 bytes hex value and LSB first) -#example 1000 = 0x03E8 -#exmaple 2000 = 0x07D0 -#example 500 = 0x01F4 -NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00} -############################################################################### -# Power to eSE is controlled by DH or PMU depending on following configurations -#define DH_PWR_CONTROL 1 -#define PMU_PWR_CONTROL 2 -NXP_ESE_POWER_DH_CONTROL=1 - -############################################################################### -# Timeout value in milliseconds for wired mode resume after RF field event timeout -NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000 - -############################################################################### -# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured -# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1 -# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2 -NXP_ESE_POWER_EXT_PMU=2 - -############################################################################### -# Whether to allow wired mode in desfire and mifare CLT -# Disable 0x00 -# Enable 0x01 -NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00 - -############################################################################### -# Restrict routing to first matched rule only. -# Blacklist enable 0x01 -# Blacklist disable 0x00 -NXP_PROP_BLACKLIST_ROUTING=0x00 - -############################################################################### -# Send DWP interface reset command as part of SE open -# Disable 0x00 -# Enable 0x01 -NXP_DWP_INTF_RESET_ENABLE=0x01 - -############################################################################### -# Timeout value in milliseconds for JCOP OS download to complete -OS_DOWNLOAD_TIMEOUT_VALUE=60000 - -############################################################################### -# Timeout value in milliseconds to send response for Felica command received -NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 - -############################################################################### \ No newline at end of file diff --git a/pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf b/pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf deleted file mode 100644 index 1f64ec7..0000000 --- a/pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf +++ /dev/null @@ -1,488 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn553" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn553_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 -NXP_SYS_CLOCK_TO_CFG=0x06 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -NXP_EXT_TVDD_CFG=0x02 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x00 - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -# eSE (SVDD) PWR REQ settings A0F2 -# Window size A0D8 -# DWP Speed A0D5 -# How eSE connected to PN553 A012 -# UICC2 bit rate A0D1 -# SWP1A interface A0D4 -# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037 -NXP_CORE_CONF_EXTN={20, 02, 29, 0A, - A0, EC, 01, 01, - A0, ED, 01, 01, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, D1, 01, 02, - A0, D4, 01, 01, - A0, 37, 01, 35, - A0, D8, 01, 02, - A0, D5, 01, 0A - } -# A0, F2, 01, 01, -# A0, 40, 01, 01, -# A0, 41, 01, 02, -# A0, 43, 01, 04, -# A0, 02, 01, 01, -# A0, 03, 01, 11, -# A0, 07, 01, 03, -# A0, 08, 01, 01 -# } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set -# to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 31, 0F, - 85, 01, 01, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 -NXP_DEFAULT_SE=0x07 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 -#PN553 0x07 -#PN80T 0x08 -NXP_NFC_CHIP=0x08 - -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -############################################################################### -NXP_DEFAULT_NFCEE_TIMEOUT=20 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -#Set the Felica CLT route Location : -#This settings will be used when application does not set this parameter -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_FELICA_CLT_ROUTE=0x01 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_AID_PWR_STATE=0x19 - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_DESFIRE_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_MIFARE_CLT_PWR_STATE=0x1B - -############################################################################### -#Set the Felica CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_FELICA_CLT_PWR_STATE=0x1B - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x22 - -############################################################################### -#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 -#msec to 20000 msec and zero is to disable. -NXP_NFCC_STANDBY_TIMEOUT=20000 - -############################################################################### -#Dynamic RSSI feature enable -# Disable 0x00 -# Enable 0x01 -NXP_AGC_DEBUG_ENABLE=0x00 - -############################################################################### -#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode -# For Technology routing to ESE Technology Mask = 4 -# For ISO-DEP Protocol routing to ESE Mask = 2 -# It can also take TECH|PROTO = 6 -# To ignore the delay set mask to = 0 -NXP_ESE_WIRED_PRT_MASK=0x00 - -############################################################################### -#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode -#For Technology routing to UICC Technology Mask = 4 -#For ISO-DEP Protocol routing to UICC set Mask = 2 -#For Select AID Routing to UICC set Mask = 1 -#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay -#set mask = 0 -NXP_UICC_WIRED_PRT_MASK=0x00 - -################################################################################ -#RF field true delay Wired Mode -# delay wired mode = 1 -# allow wired mode = 0 -NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 - -############################################################################### -#Config to allow adding aids -#NFC on/off is required after this config -#1 = enabling adding aid to NFCC routing table. -#0 = disabling adding aid to NFCC routing table. -NXP_ENABLE_ADD_AID=0x01 - -############################################################################### -# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal -# JCOP CP TIMEOUT -NXP_CP_TIMEOUT={00, 77} - -############################################################################### -# Enable/Disable checking default proto SE Id -# Disable 0x00 -# Enable 0x01 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -############################################################################### -# Wired mode resume timeout vaule in wired mode resume feature enable -# DWP resume time out in ms( 4 bytes hex value and LSB first) -#example 1000 = 0x03E8 -#exmaple 2000 = 0x07D0 -#example 500 = 0x01F4 -NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00} -############################################################################### -# Power to eSE is controlled by DH or PMU depending on following configurations -#define DH_PWR_CONTROL 1 -#define PMU_PWR_CONTROL 2 -NXP_ESE_POWER_DH_CONTROL=1 - -############################################################################### -# Timeout value in milliseconds for wired mode resume after RF field event timeout -NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000 - -############################################################################### -# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured -# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1 -# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2 -NXP_ESE_POWER_EXT_PMU=2 - -############################################################################### -# Whether to allow wired mode in desfire and mifare CLT -# Disable 0x00 -# Enable 0x01 -NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00 - -############################################################################### -# Restrict routing to first matched rule only. -# Blacklist enable 0x01 -# Blacklist disable 0x00 -NXP_PROP_BLACKLIST_ROUTING=0x00 - -############################################################################### -# Send DWP interface reset command as part of SE open -# Disable 0x00 -# Enable 0x01 -NXP_DWP_INTF_RESET_ENABLE=0x01 - -############################################################################### -# Timeout value in milliseconds for JCOP OS download to complete -OS_DOWNLOAD_TIMEOUT_VALUE=60000 - -############################################################################### -# Timeout value in milliseconds to send response for Felica command received -NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 - -############################################################################### \ No newline at end of file -- cgit v1.2.3