From 18d0e10d882285f2a2b51646d414309b16c696e0 Mon Sep 17 00:00:00 2001 From: Arian Date: Mon, 30 Sep 2019 11:20:20 +0200 Subject: shinano-common: pn54x: Drop unused example configs Change-Id: I3c24076930fd7e4698ab21607e9ca92c08160d26 --- pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf | 488 ----------------------------- 1 file changed, 488 deletions(-) delete mode 100644 pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf (limited to 'pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf') diff --git a/pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf b/pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf deleted file mode 100644 index 1f64ec7..0000000 --- a/pn54x/libnfc-nxp-PN80T_example_NCI2_0.conf +++ /dev/null @@ -1,488 +0,0 @@ -## This file is used by NFC NXP NCI HAL(external/libnfc-nci/halimpl/pn547) -## and NFC Service Java Native Interface Extensions (packages/apps/Nfc/nci/jni/extns/pn547) -############################################################################### -# Application options -# Logging Levels -# NXPLOG_DEFAULT_LOGLEVEL 0x01 -# ANDROID_LOG_DEBUG 0x03 -# ANDROID_LOG_WARN 0x02 -# ANDROID_LOG_ERROR 0x01 -# ANDROID_LOG_SILENT 0x00 -NXPLOG_EXTNS_LOGLEVEL=0x03 -NXPLOG_NCIHAL_LOGLEVEL=0x03 -NXPLOG_NCIX_LOGLEVEL=0x03 -NXPLOG_NCIR_LOGLEVEL=0x03 -NXPLOG_FWDNLD_LOGLEVEL=0x03 -NXPLOG_TML_LOGLEVEL=0x03 - -############################################################################### -# Nfc Device Node name -NXP_NFC_DEV_NODE="/dev/pn553" - -############################################################################### -# Extension for Mifare reader enable -MIFARE_READER_ENABLE=0x01 - -############################################################################### -# Vzw Feature enable -VZW_FEATURE_ENABLE=0x01 - -############################################################################### -# File name for Firmware -NXP_FW_NAME="libpn553_fw.so" - -############################################################################### -# System clock source selection configuration -#define CLK_SRC_XTAL 1 -#define CLK_SRC_PLL 2 -NXP_SYS_CLK_SRC_SEL=0x02 - -############################################################################### -# System clock frequency selection configuration -#define CLK_FREQ_13MHZ 1 -#define CLK_FREQ_19_2MHZ 2 -#define CLK_FREQ_24MHZ 3 -#define CLK_FREQ_26MHZ 4 -#define CLK_FREQ_38_4MHZ 5 -#define CLK_FREQ_52MHZ 6 -NXP_SYS_CLK_FREQ_SEL=0x02 - -############################################################################### -# The timeout value to be used for clock request acknowledgment -# min value = 0x01 to max = 0x06 -NXP_SYS_CLOCK_TO_CFG=0x06 - -############################################################################### -# NXP proprietary settings -NXP_ACT_PROP_EXTN={2F, 02, 00} - -############################################################################### -# NFC forum profile settings -NXP_NFC_PROFILE_EXTN={20, 02, 05, 01, A0, 44, 01, 00} - -############################################################################### -# NFCC Configuration Control -# Allow NFCC to manage RF Config 0x01 -# Don't allow NFCC to manage RF Config 0x00 -NXP_NFC_MERGE_RF_PARAMS={20, 02, 04, 01, 85, 01, 01} - -############################################################################### -# Standby enable settings -#NXP_CORE_STANDBY={2F, 00, 01, 01} - -############################################################################### -# NXP TVDD configurations settings -# Allow NFCC to configure External TVDD, two configurations (1 and 2) supported, -# out of them only one can be configured at a time. -NXP_EXT_TVDD_CFG=0x02 - -############################################################################### -#config1:SLALM, 3.3V for both RM and CM -NXP_EXT_TVDD_CFG_1={20, 02, 0F, 01, A0, 0E, 0B, 31, 01, 01, 31, 00, 00, 00, 01, 00, D0, 0C} - -############################################################################### -#config2: use DCDC in CE, use Tx_Pwr_Req, set CFG2 mode, SLALM, -#monitoring 5V from DCDC, 3.3V for both RM and CM, DCDCWaitTime=4.2ms -NXP_EXT_TVDD_CFG_2={20, 02, 0F, 01, A0, 0E, 0B, 11, 01, C2, B2, 00, B2, 1E, 1F, 00, D0, 0C} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_1={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_2={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_3={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_4={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_5={ -#} - -############################################################################### -# NXP RF configuration ALM/PLM settings -# This section needs to be updated with the correct values based on the platform -#NXP_RF_CONF_BLK_6={ -#} - -############################################################################### -# Set configuration optimization decision setting -# Enable = 0x01 -# Disable = 0x00 -NXP_SET_CONFIG_ALWAYS=0x00 - -############################################################################### -# Core configuration extensions -# It includes -# Wired mode settings A0ED, A0EE -# Tag Detector A040, A041, A043 -# Low Power mode A007 -# Clock settings A002, A003 -# PbF settings A008 -# Clock timeout settings A004 -# eSE (SVDD) PWR REQ settings A0F2 -# Window size A0D8 -# DWP Speed A0D5 -# How eSE connected to PN553 A012 -# UICC2 bit rate A0D1 -# SWP1A interface A0D4 -# DWP intf behavior config, SVDD Load activated by default if set to 0x31 A037 -NXP_CORE_CONF_EXTN={20, 02, 29, 0A, - A0, EC, 01, 01, - A0, ED, 01, 01, - A0, 5E, 01, 01, - A0, 12, 01, 02, - A0, 40, 01, 01, - A0, D1, 01, 02, - A0, D4, 01, 01, - A0, 37, 01, 35, - A0, D8, 01, 02, - A0, D5, 01, 0A - } -# A0, F2, 01, 01, -# A0, 40, 01, 01, -# A0, 41, 01, 02, -# A0, 43, 01, 04, -# A0, 02, 01, 01, -# A0, 03, 01, 11, -# A0, 07, 01, 03, -# A0, 08, 01, 01 -# } - -############################################################################### -# Core configuration rf field filter settings to enable set to 01 to disable set -# to 00 last bit -NXP_CORE_RF_FIELD={ 20, 02, 05, 01, A0, 62, 01, 00 } - -############################################################################### -# To enable i2c fragmentation set i2c fragmentation enable 0x01 to disable set -# to 0x00 -NXP_I2C_FRAGMENTATION_ENABLED=0x00 - -############################################################################### -# Core configuration settings -NXP_CORE_CONF={ 20, 02, 31, 0F, - 85, 01, 01, - 28, 01, 00, - 21, 01, 00, - 30, 01, 08, - 31, 01, 03, - 32, 01, 60, - 38, 01, 01, - 33, 04, 01, 02, 03, 04, - 54, 01, 06, - 50, 01, 02, - 5B, 01, 00, - 80, 01, 01, - 81, 01, 01, - 82, 01, 0E, - 18, 01, 01 - } - -############################################################################### -# Mifare Classic Key settings -#NXP_CORE_MFCKEY_SETTING={20, 02, 25,04, A0, 51, 06, A0, A1, A2, A3, A4, A5, -# A0, 52, 06, D3, F7, D3, F7, D3, F7, -# A0, 53, 06, FF, FF, FF, FF, FF, FF, -# A0, 54, 06, 00, 00, 00, 00, 00, 00} - -############################################################################### -# Default SE Options -# No secure element 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x04 -NXP_DEFAULT_SE=0x07 - -############################################################################### -#Enable SWP full power mode when phone is power off -NXP_SWP_FULL_PWR_ON=0x00 - -############################################################################### -#### Select the CHIP #### -#PN547C2 0x01 -#PN65T 0x02 -#PN548AD 0x03 -#PN66T 0x04 -#PN551 0x05 -#PN67T 0x06 -#PN553 0x07 -#PN80T 0x08 -NXP_NFC_CHIP=0x08 - -############################################################################### -# CE when Screen state is locked -# This setting is for DEFAULT_AID_ROUTE, -# DEFAULT_DESFIRE_ROUTE and DEFAULT_MIFARE_CLT_ROUTE -# Disable 0x00 -# Enable 0x01 -NXP_CE_ROUTE_STRICT_DISABLE=0x01 - -############################################################################### -#Timeout in secs to get NFCEE Discover notification -NXP_DEFAULT_NFCEE_DISC_TIMEOUT=20 - -############################################################################### -NXP_DEFAULT_NFCEE_TIMEOUT=20 - -############################################################################### -#Timeout in secs -NXP_SWP_RD_START_TIMEOUT=0x0A - -############################################################################### -#Timeout in secs -NXP_SWP_RD_TAG_OP_TIMEOUT=0x01 - -############################################################################### -#Set the default AID route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_AID_ROUTE=0x00 - -############################################################################### -#Set the Mifare Desfire route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_DESFIRE_ROUTE=0x02 - -############################################################################### -#Set the Mifare CLT route Location : -#This settings will be used when application does not set this parameter -# host 0x00 -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_MIFARE_CLT_ROUTE=0x02 - -############################################################################### -#Set the Felica CLT route Location : -#This settings will be used when application does not set this parameter -# eSE 0x01 -# UICC 0x02 -# UICC2 0x03 -DEFAULT_FELICA_CLT_ROUTE=0x01 - -############################################################################### -#Set the default AID Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_AID_PWR_STATE=0x19 - -############################################################################### -#Set the Mifare Desfire Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_DESFIRE_PWR_STATE=0x1B - -############################################################################### -#Set the Mifare CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_MIFARE_CLT_PWR_STATE=0x1B - -############################################################################### -#Set the Felica CLT Power state : -#This settings will be used when application does not set this parameter -# bit pos 0 = Switch On -# bit pos 1 = Switch Off -# bit pos 2 = Battery Off -# bit pos 3 = Screen Lock -# bit pos 4 = Screen Off -DEFAULT_FELICA_CLT_PWR_STATE=0x1B - -############################################################################### -# AID Matching platform options -# AID_MATCHING_L 0x01 -# AID_MATCHING_K 0x02 -AID_MATCHING_PLATFORM=0x01 - -############################################################################### -# P61 interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LS_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 LTSM interface options -# NFC 0x01 -# SPI 0x02 -NXP_P61_LTSM_DEFAULT_INTERFACE=0x01 - -############################################################################### -#CHINA_TIANJIN_RF_SETTING -#Enable 0x01 -#Disable 0x00 -NXP_CHINA_TIANJIN_RF_ENABLED=0x01 - -############################################################################### -#SWP_SWITCH_TIMEOUT_SETTING -# Allowed range of swp timeout setting is 0x00 to 0x3C [0 - 60]. -# Timeout in milliseconds, for example -# No Timeout 0x00 -# 10 millisecond timeout 0x0A -NXP_SWP_SWITCH_TIMEOUT=0x0A - -############################################################################### -# P61 interface options for JCOP Download -# NFC 0x01 -# SPI 0x02 -NXP_P61_JCOP_DEFAULT_INTERFACE=0x01 - -############################################################################### -# P61 JCOP OS download options -# FRAMEWORK API BY APPLICATION 0x00 -# AT BOOT_TIME 0x01 -NXP_JCOPDL_AT_BOOT_ENABLE=0x00 - -############################################################################### -# Loader service version -# NFC service checks for LS version 2.0 or 2.1 -# LS2.0 0x20 -# LS2.1 0x21 -# LS2.2 0x22 -# AT NFC service intialization -NXP_LOADER_SERVICE_VERSION=0x22 - -############################################################################### -#Timeout value in milliseconds for NFCC standby mode.The range is between 5000 -#msec to 20000 msec and zero is to disable. -NXP_NFCC_STANDBY_TIMEOUT=20000 - -############################################################################### -#Dynamic RSSI feature enable -# Disable 0x00 -# Enable 0x01 -NXP_AGC_DEBUG_ENABLE=0x00 - -############################################################################### -#Virtual Mode ESE and Wired Mode ongoing delay Wired Mode -# For Technology routing to ESE Technology Mask = 4 -# For ISO-DEP Protocol routing to ESE Mask = 2 -# It can also take TECH|PROTO = 6 -# To ignore the delay set mask to = 0 -NXP_ESE_WIRED_PRT_MASK=0x00 - -############################################################################### -#Virtual Mode UICC and Wired Mode ongoing delay Wired Mode -#For Technology routing to UICC Technology Mask = 4 -#For ISO-DEP Protocol routing to UICC set Mask = 2 -#For Select AID Routing to UICC set Mask = 1 -#It can also take values TECH|PROTO|SELECT_AID = 7 , 6 , 5 ,3 .To ignore delay -#set mask = 0 -NXP_UICC_WIRED_PRT_MASK=0x00 - -################################################################################ -#RF field true delay Wired Mode -# delay wired mode = 1 -# allow wired mode = 0 -NXP_WIRED_MODE_RF_FIELD_ENABLE=0x00 - -############################################################################### -#Config to allow adding aids -#NFC on/off is required after this config -#1 = enabling adding aid to NFCC routing table. -#0 = disabling adding aid to NFCC routing table. -NXP_ENABLE_ADD_AID=0x01 - -############################################################################### -# JCOP-3.3 continuous process timeout in msec and value should be in Hexadecimal -# JCOP CP TIMEOUT -NXP_CP_TIMEOUT={00, 77} - -############################################################################### -# Enable/Disable checking default proto SE Id -# Disable 0x00 -# Enable 0x01 -NXP_CHECK_DEFAULT_PROTO_SE_ID=0x01 - -############################################################################### -#NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE -#Enable/Disable block number checks for china transit use case -#Enable 0x01 -#Disable 0x00 -NXP_CN_TRANSIT_BLK_NUM_CHECK_ENABLE=0x01 - -############################################################################### -# Wired mode resume timeout vaule in wired mode resume feature enable -# DWP resume time out in ms( 4 bytes hex value and LSB first) -#example 1000 = 0x03E8 -#exmaple 2000 = 0x07D0 -#example 500 = 0x01F4 -NXP_WIREDMODE_RESUME_TIMEOUT={E8,03,00,00} -############################################################################### -# Power to eSE is controlled by DH or PMU depending on following configurations -#define DH_PWR_CONTROL 1 -#define PMU_PWR_CONTROL 2 -NXP_ESE_POWER_DH_CONTROL=1 - -############################################################################### -# Timeout value in milliseconds for wired mode resume after RF field event timeout -NXP_NFCC_RF_FIELD_EVENT_TIMEOUT=3000 - -############################################################################### -# NXP PMU Support configuration is sent if PMU_PWR_CONTROL is configured -# External PMU available in phone ON and phone OFF case if NXP_ESE_POWER_EXT_PMU=1 -# External PMU available only in phone ON case if NXP_ESE_POWER_EXT_PMU=2 -NXP_ESE_POWER_EXT_PMU=2 - -############################################################################### -# Whether to allow wired mode in desfire and mifare CLT -# Disable 0x00 -# Enable 0x01 -NXP_ALLOW_WIRED_IN_MIFARE_DESFIRE_CLT=0x00 - -############################################################################### -# Restrict routing to first matched rule only. -# Blacklist enable 0x01 -# Blacklist disable 0x00 -NXP_PROP_BLACKLIST_ROUTING=0x00 - -############################################################################### -# Send DWP interface reset command as part of SE open -# Disable 0x00 -# Enable 0x01 -NXP_DWP_INTF_RESET_ENABLE=0x01 - -############################################################################### -# Timeout value in milliseconds for JCOP OS download to complete -OS_DOWNLOAD_TIMEOUT_VALUE=60000 - -############################################################################### -# Timeout value in milliseconds to send response for Felica command received -NXP_HCEF_CMD_RSP_TIMEOUT_VALUE=5000 - -############################################################################### \ No newline at end of file -- cgit v1.2.3